DETAILS
Basic coated matching core wire 9%Cr 1/2%Mo 1.5% W VNbN electrode suitable for welding creep resistant steels like X10CrMoWVNb9-2, SA387 Gr92 Cl1 and Cl2, SA 182 Gr F92, SA 335 Gr P92, SA 213 Gr T92 and similar. The weld metal chemistry is very low in tramp/impurity elements. The fine tuning of the weld metal chemistry allows excellent rupture strength at high temperature, approved up to +650°C.
Features
- Basic coated MMA electrode made on matching core wire
- Excellent tensile strength in creep regime
- Good impact toughness down to 0°C.
- Low diffusible hydrogen (HD<4ml/100g).
Disclaimers
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.5 | E9015-B92 H4 |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
|---|---|---|---|
| E9015-B92 H4 Requirement | 530 (77) min. | 620 (90) min. | 17 min. |
| Typical Result, Stress relieved | 630 (91) | 740 (108) | 22 |
DEPOSIT COMPOSITION
| Classification | %Al | %C | %Cr | %Cu | %Mn | %Mo | %N | %Nb | %Ni | %P | %S | %Si | %V | %W | %Mn+Ni |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| E9015-B92 H4 Requirement | 0.04 max. | 0.08 - 0.15 | 8.0 - 10.0 | 0.25 max. | 1.20 max. | 0.30 - 0.70 | 0.03 - 0.08 | 0.02 - 0.08 | 1.00 max. | 0.020 max. | 0.015 max. | 0.60 max. | 0.15 - 0.30 | 1.50 - 2.00 | 1.40 max. |
| Typical Result | 0.01 max. | 0.11 | 9.0 | 0.05 max. | 0.60 | 0.45 | 0.05 | 0.05 | 0.60 | 0.010 | 0.010 | 0.25 | 0.20 | 1.70 | 1.20 |
TYPICAL OPERATING PROCEDURES
| Diameter |
Current
Amps |
|---|---|
| 2.5 mm (3/32") | 70-110 |
| 3.2 mm (1/8") | 80-140 |
| 4.0 mm (5/32") | 100-180 |