Menu Close
Lincoln ER70S-2 or ER70S-6 mild steel TIG Wires

Diameters / Packaging

Diameters
 (3) 10 lb Tube
 (4) 5 lb Tube
 10 lb Carton
 50 lb Carton
1/8 in (3.2 mm) ED034330 ED034327 ED033954 ED034333
1/16 in (1.6 mm) ED034328 ED034325 ED033952 ED034331
3/32 in (2.4 mm) ED034329 ED034326 ED033953 ED034332
5/32 in (4.0 mm) ED034810

Lincoln® ER70S-2

TIG (GTAW) | ED034328

CLASSIFICATIONS:
ER70S-2

Lincoln® ER70S-2 from Lincoln Electric is triple deoxidized wire containing zirconium, titanium, and aluminum in addition to silicon and manganese.

Diameter

Select Diameter

  • 1/8 in (3.2 mm)
  • 1/16 in (1.6 mm)
  • 3/32 in (2.4 mm)
  • 5/32 in (4.0 mm)

Package

Select Package

  • (3) 10 lb Tube
  • (4) 5 lb Tube
  • 10 lb Carton
  • 50 lb Carton
Buy Now

DETAILS

Triple deoxidized wire containing zirconium, titanium, and aluminum in addition to silicon and manganese. Produces x-ray quality welds over most surface conditions. Recommended for TIG welding on all grades of mild steel.

Features

  • Contains zirconium, titanium, and aluminum in addition to silicon and manganese
  • Produces x-ray quality welds over most surface conditions
  • Recommended for TIG welding on all grades of steel
  • Ink jet printing identification on entire length of electrode

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.18 ER70S-2
CWB CSA W48 ER49S-2

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
ER70S-2 Requirement 100% Ar DC- 400 (58) min. 480 (70) min. 22 min. 27 (20) min.
Typical Result, As-welded 100% Ar DC- 530 (77) 590-660 (85-96) 31 35-465 (26-343)

WIRE COMPOSITION

Classification %Al %C %Cr %Mn %Mo %Ni %P %S %Si %Ti %V %Zr %Total Cu
ER70S-2 Requirement 0.05 - 0.15 0.07 max. 0.15 max. 0.90 - 1.40 0.15 max. 0.15 max. 0.025 max. 0.035 max. 0.40 - 0.70 0.05 - 0.15 0.03 max. 0.02 - 0.12 0.50 max.
Typical Result 0.05-0.10 0.05 0.05 1.14 0.02 max. 0.04 0.005 0.003 max. 0.50-0.70 0.07-0.13 0.01 max. 0.02-0.08 0.16