Menu Close
SuperArc MIG wire, 33 lb. Plastic spool

Diameters / Packaging

Diameters
 10 lb Spool
 33 lb Spool
0.9 mm (0.035 in) ED037798 ED037799
1.0 mm (0.040 in) ED036531 ED036532
1.2 mm (0.047 in) ED037505 ED036535

Pipeliner® 70S-6 MIG (GMAW) Wire

MIG (GMAW) | ED036532

CLASSIFICATIONS:
ER70S-6

Pipeliner® 70S-6 from Lincoln Electric is an engineered alloy providing superior impact toughness at low temperatures.

Diameter

Select Diameter

  • 0.9 mm (0.035 in)
  • 1.0 mm (0.040 in)
  • 1.2 mm (0.047 in)

Package

Select Package

  • 10 lb Spool
  • 33 lb Spool
Buy Now

DETAILS

An engineered alloy providing superior impact toughness at low temperatures.

Features

  • An engineered alloy providing superior impact toughness at low temperatures
  • Microguard® Ultra provides superior feeding and arc stability
  • ProTech® packaging system

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

Documentation

You May Also Need

Magnum Pro 250 MIG Welding gun

Magnum® PRO 350 Welding Guns

K2652-2
14lb Coil Innershield NR-207 Hermetically Sealed Pail

Innershield® NR®-208-H

ED023366
50 lb Can of Lincoln Electric Stick Electrodes

Pipeliner® 8P+

ED030826
Generic 8lb can

Excalibur® 11018M MR®

ED032607
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.18 ER70S-6
ABS ABS - Part 2 3YSA
TUV TUV ISO 14341-A G 42 3 C1 3Si1, G 46 4 M21 3Si1, G 46 4 M31 3Si1

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
ER70S-6 Requirement 100% CO2 DC+ 400 (58) min. 480 (70) min. 22 min. 27 (20) min.
Typical Result, As-welded 100% CO2 DC+ 470 (68) 580 (84) 28 81-95 (60-70)

WIRE COMPOSITION

Classification %C %Cr %Mn %Ni %P %S %Si %V %Total Cu
ER70S-6 Requirement 0.06 - 0.15 0.15 max. 1.40 - 1.85 0.15 max. 0.025 max. 0.035 max. 0.80 - 1.15 0.03 max. 0.50 max.
Typical Result 0.10 0.03 1.46 0.01 0.005 0.009 0.82 0.003 max. 0.17

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Polarity CTWD
mm (in.)⁽¹⁾ 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr)
1.0 mm (0.040 in) 75-95% Ar / balance CO2 DC+ 12-19 (1/2-3/4) 2.5-14.0 (100-550) 19-31 105-320 1.0-5.2 (2.1-11.5)
1.2 mm (0.047 in) 75-95% Ar / balance CO2 DC+ 12-19 (1/2-3/4) 3.2-12.7 (125-500) 19-31 145-360 1.7-6.5 (3.7-14.3)

NOTES

Note
⁽¹⁾ CTWD (Contact Tip to Work Distance). Subtract 1/4 in. (6.4 mm) to calculate Electrical Stickout.