Menu Close
UltraCore flux-cored wire
UltraCore flux-cored wire

Diameters / Packaging

Diameters
 10 lb Spool
 33 lb Spool
0.045 in (1.1 mm) ED037219 ED037127
1/16 in (1.6 mm) ED037128

UltraCore® 309L P

Flux-Cored Gas-Shielded (FCAW-G) | ED037127

CLASSIFICATIONS:
AWS E309T1-1
E309T1-4
E309LT1-1
E309LT1-4

Smooth arc action with minimal spatter reduces post-weld cleaning

Diameter

Select Diameter

  • 0.045 in (1.1 mm)
  • 1/16 in (1.6 mm)

Package

Select Package

  • 10 lb Spool
  • 33 lb Spool
Buy Now

DETAILS

ULTRACORE® 309L P provides polished weld bead appearance, smooth arc action with minimal spatter reduces post-weld cleaning and delivers steady consistent wire feeding during welding operations.

Features

  • Precision layer wound winding delivers steady spool payoff and more consistent feeding
  • Smooth arc action with minimal spatter reduces post-weld cleaning
  • Polished weld bead appearance reduces post-weld brushing
  • Vacuum sealed foil packaging to keep moisture out

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

Documentation

You May Also Need

Innershield Flux Cored wire, 25 or 30 lb steel spool

Innershield® NR®-211-MP

ED030645
Red Line Traditional MIG Stick Welding Gloves

Traditional MIG Stick Welding Gloves

K2979-ALL

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.22 E309LT1-1, E309LT1-4
ABS AWS A5.22 E309LT1-1, E309LT1-4
CWB AWS A5.22 E309LT1-1, E309LT1-4

MECHANICAL PROPERTIES

Classification Shielding Gas Tensile Strength
MPa (ksi) 		Elongation
% 		Longitudinal Face Bend
E309LT1-1 Requirement 100% CO2 520 (75) min. 30 min. No opening in excess of 1/8 inch
E309LT1-4 Requirement 75-80% Ar, balance CO2 520 (75) min. 30 min. No opening in excess of 1/8 inch
Typical Result, As-welded 100% CO2 530 (77) 45 Passed
Typical Result, As-welded 75% Ar, 25% CO2 550 (80) 49 Passed

DEPOSIT COMPOSITION

Classification Shielding Gas %C %Cr %Cu %Mn %Mo %N %Ni %P %S %Si Ferrite Number (per AWS A4.2)
E309LT1-1 Requirement 100% CO2 0.04 max. 22.0 - 25.0 0.75 max. 0.5 - 2.5 0.75 max. Info. Only 12.0 - 14.0 0.04 max. 0.03 max. 1.0 max. Info. Only
E309LT1-4 Requirement 75-80% Ar, balance CO2 0.04 max. 22.0 - 25.0 0.75 max. 0.5 - 2.5 0.75 max. Info. Only 12.0 - 14.0 0.04 max. 0.03 max. 1.0 max. Info. Only
Typical Result 100% CO2 0.04 23.5 0.07 0.9 0.05 0.03 12.8 0.02 0.01 0.7 16
Typical Result 75% Ar, 25% CO2 0.04 23.8 0.07 0.8 0.05 0.03 12.9 0.02 0.01 0.8 18

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Polarity CTWD
mm (in.)⁽¹⁾ 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr) 		Deposition Rate
kg/hr (lb/hr) 		Efficiency
%
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 5.1 (200) 22-24 130 2.1 (4.6) 1.7 (3.8) 82.6
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 8.4 (330) 24-26 180 3.4 (7.4) 2.8 (6.1) 82.4
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 11.2 (440) 26-28 220 4.5 (10) 3.7 (8.1) 81
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 25 (1) 3.6 (140) 22-24 150 2.5 (5.6) 2.2 (4.8) 85.7
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 25 (1) 5.0 (195) 24-26 190 3.6 (7.9) 3.0 (6.7) 84.8
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 25 (1) 7.1 (280) 25-27 220 5.2 (11.4) 4.4 (9.6) 84.2

NOTES

Note
⁽¹⁾ To estimate ESO, subtract 1/4 in. (6.0 mm) from CTWD.