DETAILS
WEARSHIELD® ME stick electrode is ideal for abrasion hardfacing applications needing chrome carbides and austenite. Typical applications include Muller tires, augers, bucket teeth and dozer blades. It can only be welded in the flat and horizontal position.
Features
- High alloy produces chrome carbides and austenite
- Provides greater abrasion resistance than Wearshield® ABR or Wearshield® 44
- Low dilution weld metal provides eutectic mix of chromium carbides and austenite, with limited primary carbides.
- To be used on carbon and low alloy, austenitic manganese and austenitic stainless steels
Disclaimers
Service Information
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
DEPOSIT COMPOSITION
| Base Metal | Number of layer | %C | %Mn | %Si | %Cr |
|---|---|---|---|---|---|
| Carbon Steel | 1 Layer | 2.5 | 0.17 | 0.8 | 27.0 |
| Carbon Steel | 2 Layers | 3.0 | 0.17 | 1.0 | 30.5 |
| Carbon Steel | 3 Layers | 3.3 | 0.16 | 1.1 | 32.6 |
MECHANICAL PROPERTIES
| Number of layer | Hardness Rockwell C |
|---|---|
| 1 Layer | 49 |
| 3 Layers | 55 |
TYPICAL OPERATING PROCEDURES
| Product Size | Polarity |
Current
amps |
|---|---|---|
| 1/8 in. (3.2 mm) | DC+ | 125 - 175 |
| 1/8 in. (3.2 mm) | AC | 130 - 170 |
| 5/32 in. (4.0 mm) | DC+ | 175 - 250 |
| 5/32 in. (4.0 mm) | AC | 180 - 220 |
| 3/16 in. (4.8 mm) | DC+ | 220 - 330 |
| 3/16 in. (4.8 mm) | AC | 230 - 270 |