Menu Cerrar
Six 1 lb tubes of Excalibur 7018MR

Diámetros / Embalaje

Diámetros
mm 		(3) 10 lb Easy Open Can
 (6) 1 lb Tube
 50 lb Easy Open Can
1/4 x 18 in (6.4 x 450 mm) ED028918
1/8 x 14 in (3.2 x 350 mm) ED032589 ED031468 ED028281
3/16 x 14 in (4.8 x 350 mm) ED028283
3/32 x 14 in (2.4 x 350 mm) ED032588 ED028280
5/32 x 14 in (4.0 x 350 mm) ED032590 ED028282
7/32 x 18 in (5.6 x 450 mm) ED028917

Excalibur® 7018 MR®

Soldadura de Arco Metálico Protegido (SMAW) | ED031468

CLASIFICACIONES:
E7018 H4R

Excalibur 7018 MR desempeño de arco premium, quemado uniforme del revestimiento y remoción de escoria sin esfuerzo.

Diámetro

Seleccionar diámetro

  • 1/4 x 18 in (6.4 x 450 mm)
  • 1/8 x 14 in (3.2 x 350 mm)
  • 3/16 x 14 in (4.8 x 350 mm)
  • 3/32 x 14 in (2.4 x 350 mm)
  • 5/32 x 14 in (4.0 x 350 mm)
  • 7/32 x 18 in (5.6 x 450 mm)

Paquete

Desencadenar

  • (3) 10 lb Easy Open Can
  • (6) 1 lb Tube
  • 50 lb Easy Open Can

Detalles

  • Improved coating integrity
  • Extreme bendability
  • 60% less moisture pickup vs. competition

Características

  • Premium arc performance
  • Extreme bend ability
  • Excellent moisture resistance
  • Clean arc starts
  • Clear puddle and a smooth arc

Servicio de información

También puede necesitar

50 lb Can of Lincoln Electric Stick Electrodes

Excalibur® 7018 MR®

ED028280
50 lb Can of Lincoln Electric Stick Electrodes

Excalibur® 7018 MR®

ED028281
Excalibur 7018 MR 14 stick electrode"

EXCALIBUR® 7018 MR®

ED032588
Excalibur 7018 MR 14 stick electrode"

Excalibur® 7018 MR®

ED032589
Ver todo

ANTES DE USARLO, LEA Y COMPRENDA LA HOJA DE DATOS DE SEGURIDAD (SDS) DE ESTE PRODUCTO Y LA INFORMACIÓN ESPECÍFICA IMPRESA EN EL ENVASE DEL PRODUCTO. Página de Búsqueda SDS

Ver los resultados de la prueba de limitación de responsabilidad

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.1 E7018 H4R
ISO ISO 2560-B E4918 A H5
ABS ABS - Part 2 3YH5
BV BV - Chapter 5 3YHHH
CWB CSA W48 E4918
DNV-GL DNV - 2.9 3YH5
LR LR - Chapter 11 3YM H5

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Hardness Rockwell B
E7018 H4R Requirement 400 (58) min. 480 (70) min. 22 min. 27 (20) min.
Typical Result, As-welded 420-510 (60-74) 510-600 (74-87) 24-36 27-413 (20-304) 82-91

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V %Mn+Ni+Cr+Mo+V Diffusible Hydrogen
mL/100g Weld Metal 		1800F H2O - As received 1800F H2O - After 9 hrs at 80F/80%RH
E7018 H4R Requirement 0.15 max. 0.20 max. 1.60 max. 0.30 max. 0.30 max. 0.035 max. 0.035 max. 0.75 max. 0.08 max. 1.75 max. 4 max. 0.3 max. 0.4 max.
Typical Result 0.04-0.07 0.02-0.06 1.08-1.51 0.04 max. 0.01-0.05 0.009-0.016 0.004-0.011 0.41-0.66 0.01 max. 1.15-1.59 1-4 0.1 max. 0.2-0.4

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
3/32 in (2.4 mm) DC+ 70-110
3/32 in (2.4 mm) AC 80-120
1/8 in (3.2 mm) DC+ 90-160
1/8 in (3.2 mm) AC 100-160
5/32 in (4.0 mm) DC+ 130-210
5/32 in (4.0 mm) AC 140-210
3/16 in (4.8 mm) DC+ 180-300
3/16 in (4.8 mm) AC 200-300
7/32 in (5.6 mm) DC+ 250-330
7/32 in (5.6 mm) AC 270-370
1/4 in (6.4 mm) DC+ 300-400
1/4 in (6.4 mm) AC 325-420

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.
Extreme bendability applies to 3/32, 1/8, and 5/32 in. diameters.