Menu Cerrar
50 lb Can of Lincoln Electric Stick Electrodes

Diámetros / Embalaje

Diámetros
mm 		50 lb Easy Open Can
1/8 x 14 in (3.2 x 350 mm) ED010203
3/16 x 14 in (4.8 x 350 mm) ED010207
3/32 x 12 in (2.4 x 300 mm) ED010211
5/32 x 14 in (4.0 x 350 mm) ED010216
7/32 x 18 in (5.6 x 450 mm) ED010219

Fleetweld® 5P

Soldadura de Arco Metálico Protegido (SMAW) | ED010207

CLASIFICACIONES:
E6010

Fleetweld 5P brinda penetración profunda de arco, escoria suave con mínima interferencia de arco, excelente desempeño en posiciones vertical y sobrecabeza.

Diámetro

Seleccionar diámetro

  • 1/8 x 14 in (3.2 x 350 mm)
  • 3/16 x 14 in (4.8 x 350 mm)
  • 3/32 x 12 in (2.4 x 300 mm)
  • 5/32 x 14 in (4.0 x 350 mm)
  • 7/32 x 18 in (5.6 x 450 mm)

Paquete

Desencadenar

  • 50 lb Easy Open Can

Detalles

Fleetweld 5P is a mild steel, cellulosic stick electrode that is designed for deep arc penetration, light slag with minimal arc interference, and excellent vertical and overhead capability.

Características

  • Excellent vertical and overhead capability
  • Light slag with minimal arc interference
  • Deep arc penetration

Servicio de información

También puede necesitar

50 lb Can of Lincoln Electric Stick Electrodes

Fleetweld® 5P

ED010211
50 lb Can of Lincoln Electric Stick Electrodes

Fleetweld® 5P

ED010216
50 lb Can of Lincoln Electric Stick Electrodes

Fleetweld® 5P

ED010219
K2394-1-Stick Electrode Holder & Cable Assembly Kit

Stick Electrode Holder and Cable Assembly (Twist Mate™)

K2394-1
K704 Accessory Kit

Accessory Kit - 400 Amp

K704
Heavy Duty Leather Welding Jacket

Chamarra para Soldador, Carnaza de Uso Rudo - Grande (L) - K2989-L

K2989-L

ANTES DE USARLO, LEA Y COMPRENDA LA HOJA DE DATOS DE SEGURIDAD (SDS) DE ESTE PRODUCTO Y LA INFORMACIÓN ESPECÍFICA IMPRESA EN EL ENVASE DEL PRODUCTO. Página de Búsqueda SDS

Ver los resultados de la prueba de limitación de responsabilidad

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.1 E6010
ABS AWS A5.1 E6010
CWB CSA W48 E4310
LR LR - Chapter 11 3M

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
E6010 Requirement 330 (48) min. 410 (60) min. 22 min. 27 (20) min.
Typical Result, As-welded 380-470 (56-68) 460-560 (67-82) 22-32 32-118 (23-87)

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V
E6010 Requirement 0.20 max. 0.20 max. 1.20 max. 0.30 max. 0.30 max. 1.00 max. 0.08 max.
Typical Result 0.10-0.13 0.05 max. 0.35-0.60 0.01 max. 0.03 max. 0.004-0.012 0.004-0.012 0.14-0.39 0.01 max.

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
3/32 in (2.4 mm) DC+ 40-80
3/32 in (2.4 mm) DC- 50-85
1/8 in (3.2 mm) DC+ 70-130
1/8 in (3.2 mm) DC- 75-135
5/32 in (4.0 mm) DC+ 90-165
5/32 in (4.0 mm) DC- 100-175
3/16 in (4.8 mm) DC+ 140-225
3/16 in (4.8 mm) DC- –
7/32 in (5.6 mm) DC+ 200-275
7/32 in (5.6 mm) DC- –
1/4 in (6.4 mm) DC+ 220-325
1/4 in (6.4 mm) DC- –

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.