Menu Cerrar
SuperGlide MIG wire, Steel Spool

Diámetros / Embalaje

Diámetros
mm 		(4) 15 lb Plastic Spool
 33 lb Spool
 60 lb Coil
0.045 in (1.1 mm) ED029418 ED029201 ED029202
0.052 in (1.3 mm) ED029204
1/16 in (1.6 mm) ED029206 ED029207

Outershield® 71 Elite

Soldadura con Núcleo de Fundente Protegido con Gas (FCAW-G) | ED029204

CLASIFICACIONES:
E71T-9C-H8
E71T-9M-H8
E71T1-C1A2-CS1-H8
E71T1-M21A2-CS1-H8

Outershield 71 Elite, Escoria de solidificación rápida para soldaduras fuera de posición.

Diámetro

Seleccionar diámetro

  • 0.045 in (1.1 mm)
  • 0.052 in (1.3 mm)
  • 1/16 in (1.6 mm)

Paquete

Desencadenar

  • 33 lb Spool

Detalles

Smooth arc transfer, low spatter and good bead appearance make this a top quality electrode. Operators will enjoy the well directed arc with small ball transfer.

Características

  • Smooth arc transfer and low spatter
  • Designed for welding with either 100% CO2 or 75-82% Argon/balance CO2 shielding gases
  • Good bead appearance
  • Fast freezing slag for out-of-position welding
  • Meets AWS D1.8 seismic lot waiver requirements
  • Notes: AWS D1.8 structural steel seismic supplement test data can be found at the Lincoln Electric Certificate Center.

Servicio de información

Documentación

También puede necesitar

Magnum Pro 250 MIG Welding gun

Magnum® PRO 350 Welding Guns

K2652-2
SuperArc MIG wire, fiber spool

SuperArc® L-56®

ED021278
Outershield Wire, 25 LB Plastic Spool

Outershield® 71M

ED022660
UltraCore, 33 LB fiber spool

UltraCore® 71A85

ED031664
Ver todo

ANTES DE USARLO, LEA Y COMPRENDA LA HOJA DE DATOS DE SEGURIDAD (SDS) DE ESTE PRODUCTO Y LA INFORMACIÓN ESPECÍFICA IMPRESA EN EL ENVASE DEL PRODUCTO. Página de Búsqueda SDS

Ver los resultados de la prueba de limitación de responsabilidad

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.20 E71T-1C-H8, E71T-1M-H8, E71T-9C-H8, E71T-9M-H8
AWS AWS A5.36 E71T1-C1A2-CS1-H8, E71T1-M21A2-CS1-H8
ABS ABS - Part 2 3YSA H10
CWB CSA W48 E491T1-C1A3-CS1-H8 (E491T-9-H8), E491T1-GA3-CS1-H8 (E491T-9M-H8), E491T1-M20A3-CS1-H8 (E491T-9M-H8), E491T1-M21A3-CS1-H8 (E491T-9M-H8)
DNV-GL DNV - 2.9 III YMS H10
LR LR - Chapter 11 3YS H10

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
E71T-9C-H8 Requirement 100% CO2 DC+ 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
E71T-9M-H8 Requirement 75-80% Ar, balance CO2 DC+ 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
E71T1-C1A2-CS1-H8 Requirement 100% CO2 DC+ 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
E71T1-M21A2-CS1-H8 Requirement M21-ArC DC+ 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
Typical Result, As-welded 100% CO2 DC+ 560 (81) 610 (89) 30 38-46 (28-34)
Typical Result, As-welded 75% Ar, 25% CO2 DC+ 590 (86) 650 (95) 25 89-95 (66-70)

DEPOSIT COMPOSITION

Classification Shielding Gas Polarity %B %C %Mn %P %S %Si Diffusible Hydrogen
mL/100g Weld Metal
E71T-9C-H8 Requirement 100% CO2 DC+ 0.12 max. 1.75 max. 0.03 max. 0.03 max. 0.90 max. 8.0 max.
E71T-9M-H8 Requirement 75-80% Ar, balance CO2 DC+ 0.12 max. 1.75 max. 0.03 max. 0.03 max. 0.90 max. 8.0 max.
E71T1-C1A2-CS1-H8 Requirement 100% CO2 DC+ 0.12 max. 1.75 max. 0.030 max. 0.030 max. 0.90 max. 8 max.
E71T1-M21A2-CS1-H8 Requirement M21-ArC DC+ 0.12 max. 1.75 max. 0.030 max. 0.030 max. 0.90 max. 8 max.
Typical Result 100% CO2 DC+ 0.0050 0.06 1.21 0.01 0.011 0.41 4.2
Typical Result 75% Ar, 25% CO2 DC+ 0.0060 0.06 1.45 0.01 0.01 0.59 5.7

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Polarity CTWD
mm (in.) 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr) 		Deposition Rate
kg/hr (lb/hr) 		Efficiency
%
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 4.5 (175) 21-24 130 1.7 (3.8) 1.5 (3.3) 87
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 6.4 (250) 23-26 155 2.4 (5.4) 2.1 (4.7) 87
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 7.6 (300) 24-27 180 2.9 (6.4) 2.5 (5.6) 87
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 8.9 (350) 25-28 205 3.4 (7.6) 3.0 (6.6) 87
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 10.2 (400) 26-29 230 4.0 (8.7) 3.5 (7.6) 87
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 12.8 (500) 27-30 260 5.0 (10.9) 4.3 (9.5) 87
0.045 in (1.1 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 15.3 (600) 28-31 290 6.0 (13.1) 5.2 (11.4) 87
0.052 in (1.3 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 3.8 (150) 21-24 150 2.1 (4.6) 1.8 (3.9) 86
0.052 in (1.3 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 5.1 (200) 22-25 180 2.8 (6.1) 2.4 (5.2) 86
0.052 in (1.3 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 6.4 (250) 23-26 210 3.4 (7.6) 3.0 (6.5) 86
0.052 in (1.3 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 7.6 (300) 24-27 240 4.8 (10.6) 4.1 (7.8) 86
0.052 in (1.3 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 10.2 (400) 26-28 315 6.2 (13.7) 5.4 (10.5) 86
0.052 in (1.3 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 12.8 (500) 28-31 335 6.9 (15.2) 6.0 (13.1) 86
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 3.2 (125) 21-24 190 2.4 (5.2) 2.0 (4.4) 85
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 3.8 (150) 22-25 205 2.8 (6.2) 2.4 (5.3) 85
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 5.1 (200) 22-26 240 3.8 (8.3) 3.2 (7.0) 85
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 6.4 (250) 23-27 290 4.7 (10.3) 4.0 (8.8) 85
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 7.6 (300) 24-28 325 5.6 (12.4) 4.8 (10.5) 85
1/16 in (1.6 mm) 75% Ar / 25% CO2 DC+ 19 (3/4) 10.2 (400) 27-31 400 7.5 (16.5) 6.4 (14.0) 85