Diámetros / Embalaje
|
Diámetros mm |
10 lb Spool |
|---|---|
| 0.035 in (0.9 mm) | ED033948 |
Detalles
Recommended for TIG welding on all grades of steel.
Características
- Q2 Lot® - certificate showing actual deposit composition and actual mechanical properties available online
- A PLW product which has been treated to minimize weld defects that can be seen in the use of MIG wires for the automatic TIG process
- Recommended for TIG welding on all grades of steel
Servicio de información
ANTES DE USARLO, LEA Y COMPRENDA LA HOJA DE DATOS DE SEGURIDAD (SDS) DE ESTE PRODUCTO Y LA INFORMACIÓN ESPECÍFICA IMPRESA EN EL ENVASE DEL PRODUCTO. Página de Búsqueda SDS
Ver los resultados de la prueba de limitación de responsabilidad
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.18 | ER70S-2 |
MECHANICAL PROPERTIES
| Classification | Shielding Gas | Polarity |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
|---|---|---|---|---|---|
| ER70S-2 Requirement | 100% Ar | DC- | 400 (58) min. | 480 (70) min. | 22 min. |
| Typical Result, As-welded | 100% Ar | DC- | 600 (88) | 670 (97) | 29 |
WIRE COMPOSITION
| Classification | %Al | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %Ti | %V | %Zr | %Total Cu |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ER70S-2 Requirement | 0.05 - 0.15 | 0.07 max. | 0.15 max. | 0.90 - 1.40 | 0.15 max. | 0.15 max. | 0.025 max. | 0.035 max. | 0.40 - 0.70 | 0.05 - 0.15 | 0.03 max. | 0.02 - 0.12 | 0.50 max. |
| Typical Result | 0.06 | 0.05 | 0.10 | 1.11 | 0.02 | 0.05 | 0.004 | 0.005 | 0.53 | 0.08 | 0.01 | 0.02 | 0.16 |