Diámetros/embalaje
|
Diámetros |
4.5 KG PE Tube |
|---|---|
| 2,4 mm (3/32 in) | ED035252 |
DETALLES
LINCOLN® ER630 can be used in as welded condition or may be heat treated to obtain higher strength.
Características
- Precipitation hardening martensitic stainless steel used for welding materials of similar chemical composition such as 17-4 and 17-7 plates
- Can be used in as welded condition or may be heat treated to obtain higher strength
- Mechanical properties of the alloy are greatly influenced by the heat treatment
- Ink jet printing identification on entire length of electrode
- Q2 Lot® - Certificate showing actual wire composition and calculated ferrite number (FN) available online
Información de mantenimiento
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Página de búsqueda de HDS
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.9 | ER630 |
WIRE COMPOSITION
| Classification | %C | %Cr | %Cu | %Mn | %Mo | %N | %Nb | %Ni | %P | %S | %Si | Ferrite Number (Delong ©) | Ferrite Number (WRC-1992 ©) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ER630 Requirement | 0.05 max. | 16.00 - 16.75 | 3.25 - 4.00 | 0.25 - 0.75 | 0.75 max. | Info. Only | 0.15 - 0.30 | 4.5 - 5.0 | 0.03 max. | 0.03 max. | 0.75 max. | ||
| Typical Result | 0.02 | 16.45-16.60 | 3.60-3.70 | 0.57-0.65 | 0.09-0.12 | 0.02-0.04 | 0.22-0.23 | 4.6-4.8 | 0.02 | 0.003 max. | 0.46-0.56 | 20 | 19 |