Detalles
Mild steel rutile stick electrode designed for use with small AC welders with low OCV
Características
- Operable with low amperages on sheet metal
- Excellent bead appearance
- Slag control accommodates vertical down welding
Servicio de información
ANTES DE USARLO, LEA Y COMPRENDA LA HOJA DE DATOS DE SEGURIDAD (SDS) DE ESTE PRODUCTO Y LA INFORMACIÓN ESPECÍFICA IMPRESA EN EL ENVASE DEL PRODUCTO. Página de Búsqueda SDS
Ver los resultados de la prueba de limitación de responsabilidad
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.1 | E6013 |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -18°C (0°F) |
|---|---|---|---|---|
| E6013 Requirement | 330 (48) min. | 410 (60) min. | 17 min. | |
| Typical Result, As-welded | 420-430 (61-63) | 480-490 (70-71) | 27-28 | 16-91 (12-67) |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %V |
|---|---|---|---|---|---|---|---|---|---|
| E6013 Requirement | 0.20 max. | 0.20 max. | 1.20 max. | 0.30 max. | 0.30 max. | 1.00 max. | 0.08 max. | ||
| Typical Result | 0.04-0.05 | 0.02-0.04 | 0.36-0.44 | 0.01 | 0.03-0.05 | 0.009-0.012 | 0.006-0.011 | 0.16-0.23 | 0.01 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity⁽¹⁾ |
Current
Amps |
|---|---|---|
| 3/32" (2.4 mm) | AC | 75-115 |
| 3/32" (2.4 mm) | DC± | 70-105 |
| 1/8" (3.2 mm) | AC | 110-140 |
| 1/8" (3.2 mm) | DC± | 100-135 |
| 5/32" (4.0 mm) | AC | 160-200 |
| 5/32" (4.0 mm) | DC± | 145-180 |
NOTES
| Note |
|---|
| ⁽¹⁾ Preferred polarity is listed first. |