Detalles
- A nickel-bearing electrode with 1/2% molybdenum
- Can be used for higher strength weldments where impact properties exceeding 27 J (20 ft·lbf) at -62°C (-80°F) are required
- Suitable for use where consumables with less than 1% Ni are required
Características
- A nickel-bearing electrode with 1/2% molybdenum
- Can be used for higher strength weldments where impact properties exceeding 27 J (20 ft•lbf) at -62°C (-80°F) are required
- Suitable for use where consumables with less than 1% Ni are required
- Actual (Type 3.1) certificates for each lot of wire showing chemical composition are available in the certificate center of lincolnelectric.com
Servicio de información
Documentación
También puede necesitar
ANTES DE USARLO, LEA Y COMPRENDA LA HOJA DE DATOS DE SEGURIDAD (SDS) DE ESTE PRODUCTO Y LA INFORMACIÓN ESPECÍFICA IMPRESA EN EL ENVASE DEL PRODUCTO. Página de Búsqueda SDS
Ver los resultados de la prueba de limitación de responsabilidad
WIRE COMPOSITION
| Classification | %C | %Mn | %Mo | %Ni | %P | %S | %Si | %Total Cu |
|---|---|---|---|---|---|---|---|---|
| EF3 Requirement | 0.10 - 0.18 | 1.50 - 2.40 | 0.40 - 0.65 | 0.70 - 1.10 | 0.025 max. | 0.025 max. | 0.30 max. | 0.35 max. |
| S3Ni1Mo Requirement | 0.07 - 0.15 | 1.30 - 1.80 | 0.45 - 0.65 | 0.80 - 1.20 | 0.020 max. | 0.020 max. | 0.05 - 0.35 | |
| Typical Result | 0.12 | 1.79 | 0.52 | 0.84 | 0.008 | 0.005 | 0.23 | 0.07 |