Diámetros / Embalaje
|
Diámetros mm |
33 lb (15 kg) Steel Spool |
|---|---|
| 0.035 in (0.9 mm) | MG413035667 |
| 0.045 in (1.1 mm) | MG413045667 |
| 1/16 in (1.6 mm) | MG413062667 |
Detalles
TECHALLOY® 413 ideal for MIG overlay on steel after a first layer with Nickel 208, preheating is generally not required for this product.
Características
- This filler metal can be used for MIG overlay on steel after a first layer with Nickel 210
- Preheating is generally not required for this product
- Q2 Lot® -Certificate showing actual wire composition available online
Servicio de información
ANTES DE USARLO, LEA Y COMPRENDA LA HOJA DE DATOS DE SEGURIDAD (SDS) DE ESTE PRODUCTO Y LA INFORMACIÓN ESPECÍFICA IMPRESA EN EL ENVASE DEL PRODUCTO. Página de Búsqueda SDS
Ver los resultados de la prueba de limitación de responsabilidad
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.7 | ERCuNi |
| CWB | AWS A5.7 | ERCuNi |
| MIL | MIL-E-21562E | EN67 |
WIRE COMPOSITION
| Classification | %Fe | %Mn | %P | %Pb | %S | %Si | %Ti | %Cu+Ag | %Ni+Co |
|---|---|---|---|---|---|---|---|---|---|
| ERCuNi Requirement | 0.40 - 0.75 | 1.0 max. | 0.02 max. | 0.02 max. | 0.01 max. | 0.25 max. | 0.20 - 0.50 | Remainder | 29.0 - 32.0 |
| Typical Result | 0.55 | 0.6 | 0.00 max. | 0.00 max. | 0.00 max. | 0.03 | 0.34 | 68 | 30.7 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas | Polarity |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|---|
| .035" (0.9 mm) | 75% Ar, 25% He | DC+ | 25-29 | 150-190 |
| .045" (1.1 mm) | 75% Ar, 25% He | DC+ | 25-28 | 180-240 |
| 1/16" (1.6 mm) | 75% Ar, 25% CO2 | DC+ | 29-33 | 200-250 |