Menu Close
SuperArc MIG wire, 33 lb. Plastic spool

Diameters / Packaging

Diameters
 33 lb Spool
0.040 in (1.0 mm) ED036532

Pipeliner® 70S-6 MIG (GMAW) Wire

MIG (GMAW) | ED036532

CLASSIFICATIONS:
ER70S-6

Pipeliner® 70S-6 from Lincoln Electric is an engineered alloy providing superior impact toughness at low temperatures.

Diameter

Select Diameter

  • 0.040 in (1.0 mm)

Package

Select Package

  • 33 lb Spool

DETAILS

An engineered alloy providing superior impact toughness at low temperatures.

Features

  • An engineered alloy providing superior impact toughness at low temperatures
  • Microguard® Ultra provides superior feeding and arc stability
  • ProTech® packaging system

Service Information

You May Also Need

50 lb Can of Lincoln Electric Stick Electrodes

Pipeliner® 8P+

ED030826
Lincoln Electric MIG Wire

Pipeliner ® 80Ni1

ED033119
Drive Roll and Guide Tube Kit

Drive roll kit (2R) 1.1 mm

KP1696-045S
Magnum Pro 250L Gun

Magnum® PRO Nozzle - 350A, Thread-on, Recess, 5/8 in (15.9 mm) ID

KP2742-1-62R
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.18 ER70S-6
ABS ABS - Part 2 3YSA
TUV TUV ISO 14341-A G 42 3 C1 3Si1, G 46 4 M21 3Si1, G 46 4 M31 3Si1

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
ER70S-6 Requirement 100% CO2 DC+ 400 (58) min. 480 (70) min. 22 min. 27 (20) min.
Typical Result, As-welded 100% CO2 DC+ 470 (68) 580 (84) 28 81-95 (60-70)

WIRE COMPOSITION

Classification %C %Cr %Mn %Ni %P %S %Si %V %Total Cu
ER70S-6 Requirement 0.06 - 0.15 0.15 max. 1.40 - 1.85 0.15 max. 0.025 max. 0.035 max. 0.80 - 1.15 0.03 max. 0.50 max.
Typical Result 0.10 0.03 1.46 0.01 0.005 0.009 0.82 0.003 max. 0.17

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Polarity CTWD
mm (in.)⁽¹⁾ 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr)
1.0 mm (0.040 in) 75-95% Ar / balance CO2 DC+ 12-19 (1/2-3/4) 2.5-14.0 (100-550) 19-31 105-320 1.0-5.2 (2.1-11.5)
1.2 mm (0.047 in) 75-95% Ar / balance CO2 DC+ 12-19 (1/2-3/4) 3.2-12.7 (125-500) 19-31 145-360 1.7-6.5 (3.7-14.3)

NOTES

Note
⁽¹⁾ CTWD (Contact Tip to Work Distance). Subtract 1/4 in. (6.4 mm) to calculate Electrical Stickout.