Diameters / Packaging
|
Diameters |
33 lb (15 kg) Steel Spool |
|---|---|
| 0.045 in (1.1 mm) | ED036050 |
Détails
Le fil Blue Max® MIG est conçu pour fonctionner de manière exceptionnelle à des vitesses d'alimentation de fil élevées
Traits
- Conçu pour offrir une bonne résistance aux fissures entre des métaux différents
- Dépôts de soudure de résistance modérée
- Q2 Lot® - Certificats indiquant la composition réelle du fil et le taux de ferrite (FN) calculé disponibles en ligne
- 7% Manganese (Mn) increases resistance to hot cracking between dissimilar steel
- Designed to be similar to AWS ER307
- Work hardening Manganese steel
Disclaimers
Des informations de service
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| ISO | ISO 14343-A | G 18 8 Mn |
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| ISO | ISO 14343-A | G 18 8 Mn |
WIRE COMPOSITION
| Classification | %C | %Cr | %Cu | %Mn | %Mo | %Ni | %P | %S | %Si |
|---|---|---|---|---|---|---|---|---|---|
| G 18 8 Mn Requirement | 0.20 max. | 17.0 - 20.0 | 0.5 max. | 5.0 - 8.0 | 0.5 max. | 7.0 - 10.0 | 0.03 max. | 0.03 max. | 1.2 max. |
| Typical Result | 0.05 | 17.9 | 0.3 | 5.8 | 0.2 | 8.1 | 0.03 | 0.01 | 0.8 |
| Classification | %C | %Cr | %Cu | %Mn | %Mo | %Ni | %P | %S | %Si |
|---|---|---|---|---|---|---|---|---|---|
| G 18 8 Mn Requirement | 0.20 max. | 17.0 - 20.0 | 0.5 max. | 5.0 - 8.0 | 0.5 max. | 7.0 - 10.0 | 0.03 max. | 0.03 max. | 1.2 max. |
| Typical Result | 0.05 | 17.9 | 0.3 | 5.8 | 0.2 | 8.1 | 0.03 | 0.01 | 0.8 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|
| 0.045 in (1.1 mm) | 98% Ar / 2% O2 | 28-32 | 180-250 |
| Diameter | Shielding Gas |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|
| 0.045 in (1.1 mm) | 98% Ar / 2% O2 | 28-32 | 180-250 |