Menu Close
50 lb Can of Lincoln Electric Stick Electrodes

Diameters / Packaging

Diameters
 25 lb Easy Open Can
 50 lb Easy Open Can
1/8 x 14 in (3.2 x 350 mm) ED033163
3/32 x 12 in (2.4 x 300 mm) ED033162
5/32 x 14 in (4.0 x 350 mm) ED033164

Excalibur® 10018-D2 MR® Stick (SMAW) Electrode

Stick (SMAW) | ED033164

AWS:
E10018-D2 H4R

Low Alloy, Low Hydrogen • AWS E10018-D2 H4R

Diamètre

Sélectionnez le diamètre

  • 1/8 x 14 in (3.2 x 350 mm)
  • 3/32 x 12 in (2.4 x 300 mm)
  • 5/32 x 14 in (4.0 x 350 mm)

Paquet

Sélectionnez un forfait

  • 50 lb Easy Open Can
Acheter maintenant

Détails

Low alloy stick electrode designed for Chromium-molybdenum and other low alloy steels, including AISI 4130, 4140, 8630 and ASTM A182 and A336 Grades F22

Traits

  • Q2 Lot® - Lot Controlled Chemistry and Mechanical Properties
  • Premium arc performance
  • Easy strike
  • Easy slag removal

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

Vous pourriez également avoir besoin

50 lb Can of Lincoln Electric Stick Electrodes

Excalibur® 7018 MR® Stick (SMAW) Electrode

ED028281
50 lb Can of Lincoln Electric Stick Electrodes

Excalibur® 7018 MR® Stick (SMAW) Electrode

ED028282
50 lb Can of Lincoln Electric Stick Electrodes

Excalibur® 7018 MR® Stick (SMAW) Electrode

ED028283
50 lb Can of Lincoln Electric Stick Electrodes

Excalibur® 10018-D2 MR® Stick (SMAW) Electrode

ED033162
Voir tout

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.5 E10018-D2 H4R
ABS ABS - Part 2 3YQ620 H5
CWB CWB AWS A5.5 E6918-D2 (E10018-D2-H4R)
DNV-GL DNV - 2.9 3 Y62H5
LR LR - Chapter 11 3Y62M H5

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -50°C (-60°F) 		Hardness Rockwell B
E10018-D2 H4R Requirement 600 (87) min. 690 (100) min. 16 min.
Typical Result, 1 hour @ 620°C (1150°F) 670-850 (98-123) 760-920 (110-134) 17-25 27-70 (20-52) 98-105

DEPOSIT COMPOSITION

Classification %C %Mn %Mo %Ni %P %S %Si Diffusible Hydrogen
mL/100g Weld Metal 		1800F H2O - As received 1800F H2O - After 9 hrs at 80F/80%RH
E10018-D2 H4R Requirement 0.15 max. 1.65 - 2.00 0.25 - 0.45 0.90 max. 0.03 max. 0.03 max. 0.80 max. 4 max. 0.15 max. 0.4 max.
Typical Result 0.08-0.14 1.82-1.98 0.36-0.41 0.69-0.83 0.01-0.02 0.01 0.38-0.49 2-4 0.05-0.13 0.1-0.4

TYPICAL OPERATING PROCEDURES

Diameter Polarity Current
Amps
3/32 in (2.4 mm) DC+ 60-110
3/32 in (2.4 mm) AC 65-120
1/8 in (3.2 mm) DC+ 85-160
1/8 in (3.2 mm) AC 90-170
5/32 in (4.0 mm) DC+ 110-210
5/32 in (4.0 mm) AC 115-220