Menu Close
Generic 8lb can

Diameters / Packaging

Diameters
 (3) 8 lb Easy Open Can
 (3) 10 lb Easy Open Can
 5 KG BOX
 10 KG BOX
 50 lb Easy Open Can
 50 lb Easy Open Can Buy America
1/4 x 18 in (6.4 x 450 mm) ED028920
1/8 x 14 in (3.2 x 350 mm) ED032592 ED028702 ED034309
3.2 MM ED029049
3/16 x 14 in (4.8 x 350 mm) ED028706
3/32 x 12 in (2.4 x 300 mm) ED033179
3/32 x 14 in (2.4 x 350 mm) ED032591 ED028700 ED034308
4.0 MM ED029050
4.8 MM ED029155
5/32 x 14 in (4.0 x 350 mm) ED028704
7/32 x 18 in (5.6 x 450 mm) ED028919

Excalibur® 7018-1 MR® Stick (SMAW) Electrode

Stick (SMAW) | ED032591

AWS:
E7018-1 H4R

Mild Steel, Low Hydrogen • AWS E7018-1 H4R

Diamètre

Sélectionnez le diamètre

  • 1/4 x 18 in (6.4 x 450 mm)
  • 1/8 x 14 in (3.2 x 350 mm)
  • 3/16 x 14 in (4.8 x 350 mm)
  • 3/32 x 12 in (2.4 x 300 mm)
  • 3/32 x 14 in (2.4 x 350 mm)
  • 3.2 MM
  • 4.0 MM
  • 4.8 MM
  • 5/32 x 14 in (4.0 x 350 mm)
  • 7/32 x 18 in (5.6 x 450 mm)

Paquet

Sélectionnez un forfait

  • (3) 10 lb Easy Open Can
  • 50 lb Easy Open Can
  • 50 lb Easy Open Can Buy America
Acheter maintenant

Détails

Mild steel low hydrogen electrode meets Chemical Composition recommendations of API 751. Q2 Lot® - Lot Controlled Chemistry and Mechanical Properties

Traits

  • Exceeds AWS toughness requirements at -50°F
  • Extreme bend ability
  • Moisture pick-up resistant
  • Clear puddle and a smooth arc
  • Meets Chemical Composition Recommendations of API 751

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

Vous pourriez également avoir besoin

50 lb Can of Lincoln Electric Stick Electrodes

EXCALIBUR® 7018-1 MR®

ED028700
50 lb Can of Lincoln Electric Stick Electrodes

EXCALIBUR® 7018-1 MR®

ED028702
50 lb Can of Lincoln Electric Stick Electrodes

Excalibur® 7018-1 MR® Stick (SMAW) Electrode

ED028704
50 lb Can of Lincoln Electric Stick Electrodes

Excalibur ® 7018-1 MR®

ED028706
Voir tout

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.1 E7018-1 H4R
ISO ISO 2560-A E 42 4 Z B 3 2 H5
ISO ISO 2560-B E4918-1 A U H5
ABS ABS - Part 2 3YH5
BV BV - Chapter 5 3YHHH
CWB CSA W48 E4918-1-H4R
DNV-GL DNV - 2.9 3YH5
LR LR - Chapter 11 3YM H5

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) 		Charpy V-Notch
J (ft-lbs) @ -45°C (-50°F) 		Hardness Rockwell B
E7018-1 H4R Requirement 400 (58) min. 480 (70) min. 22 min. 27 (20) min.
As-welded Typical Result 460-540 (66-78) 550-630 (80-91) 22-31 141-161 (104-119) 27-181 (20-134) 82-93

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V %Mn+Ni+Cr+Mo+V Diffusible Hydrogen
mL/100g Weld Metal 		1800F H2O - As received 1800F H2O - After 9 hrs at 80F/80%RH
E7018-1 H4R Requirement 0.15 max. 0.20 max. 1.60 max. 0.30 max. 0.30 max. 0.035 max. 0.035 max. 0.75 max. 0.08 max. 1.75 max. 4 max. 0.3 max. 0.4 max.
Typical Result 0.04-0.07 0.02-0.04 1.20-1.42 0.15-0.28 0.06 max. 0.009-0.016 0.003-0.011 0.32-0.54 0.01 max. 1.51-1.75 1-4 0.1 max. 0.4 max.

TYPICAL OPERATING PROCEDURES

Classification Polarity⁽¹⁾ Current
Amps
3/32 in (2.4 mm) DC+ 70-110
3/32 in (2.4 mm) AC 80-120
1/8 in (3.2 mm) DC+ 90-160
1/8 in (3.2 mm) AC 100-160
5/32 in (4.0 mm) DC+ 130-210
5/32 in (4.0 mm) AC 140-210
3/16 in (4.8 mm) DC+ 180-300
3/16 in (4.8 mm) AC 200-300
7/32 in (5.6 mm) DC+ 250-330
7/32 in (5.6 mm) AC 270-370
1/4 in (6.4 mm) DC+ 300-400
1/4 in (6.4 mm) AC 325-420

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.