Menu Close
50 lb Can of Lincoln Electric Stick Electrodes

Diameters / Packaging

Diameters
 (3) 10 lb Easy Open Can
 50 lb Easy Open Can
1/8 x 14 in (3.2 x 350 mm) ED032562 ED010203
3/16 x 14 in (4.8 x 350 mm) ED010207
3/32 x 12 in (2.4 x 300 mm) ED032561 ED010211
5/32 x 14 in (4.0 x 350 mm) ED010216
7/32 x 18 in (5.6 x 450 mm) ED010219

Fleetweld® 5P

Stick (SMAW) | ED010203

AWS:
AWS : E6010

Mild Steel, Cellulosic • AWS E6010

Diamètre

Sélectionnez le diamètre

  • 1/8 x 14 in (3.2 x 350 mm)
  • 3/16 x 14 in (4.8 x 350 mm)
  • 3/32 x 12 in (2.4 x 300 mm)
  • 5/32 x 14 in (4.0 x 350 mm)
  • 7/32 x 18 in (5.6 x 450 mm)

Paquet

Sélectionnez un forfait

  • (3) 10 lb Easy Open Can
  • 50 lb Easy Open Can
Acheter maintenant

Détails

  • Deep arc penetration
  • Light slag with minimal arc interference
  • Excellent vertical and overhead capability

Traits

  • Excellent vertical and overhead capability
  • Light slag with minimal arc interference
  • Deep arc penetration

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

Vous pourriez également avoir besoin

50 lb Can of Lincoln Electric Stick Electrodes

Fleetweld® 5P

ED010207
50 lb Can of Lincoln Electric Stick Electrodes

Fleetweld® 5P

ED010211
50 lb Can of Lincoln Electric Stick Electrodes

Fleetweld® 5P

ED010216
50 lb Can of Lincoln Electric Stick Electrodes

Fleetweld® 5P® Stick Electrode (SMAW)

ED010219
Voir tout

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.1 E6010
ABS AWS A5.1 E6010
CWB CSA W48 E4310
LR LR - Chapter 11 3M

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
E6010 Requirement 330 (48) min. 410 (60) min. 22 min. 27 (20) min.
Typical Result, As-welded 380-470 (56-68) 460-560 (67-82) 22-32 32-118 (23-87)

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V
E6010 Requirement 0.20 max. 0.20 max. 1.20 max. 0.30 max. 0.30 max. 1.00 max. 0.08 max.
Typical Result 0.10-0.13 0.05 max. 0.35-0.60 0.01 max. 0.03 max. 0.004-0.012 0.004-0.012 0.14-0.39 0.01 max.

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
3/32 in (2.4 mm) DC+ 40-80
3/32 in (2.4 mm) DC- 50-85
1/8 in (3.2 mm) DC+ 70-130
1/8 in (3.2 mm) DC- 75-135
5/32 in (4.0 mm) DC+ 90-165
5/32 in (4.0 mm) DC- 100-175
3/16 in (4.8 mm) DC+ 140-225
3/16 in (4.8 mm) DC- –
7/32 in (5.6 mm) DC+ 200-275
7/32 in (5.6 mm) DC- –
1/4 in (6.4 mm) DC+ 220-325
1/4 in (6.4 mm) DC- –

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.