Diameters / Packaging
|
Diameters |
55 lb Spool |
|---|---|
| 3/32 in (2.4 mm) | ED035171 |
Détails
LINCOLNWELD® 309LMo_MOD is often used for surfacing base metals to improve their resistance to corrosion, and is used to achieve a single-layer overlay with a chemical composition similar to that of a 316L stainless or as a butter pass before overlaying with 347 nickel.
Traits
- Similar to 309 with the exception of the addition of 2.0 - 3.0% molybdenum to increase its pitting corrosion resistance in halide containing environments
- For surfacing of base metals to improve their resistance to corrosion
- Used to achieve a single-layer overlay with a chemical composition similar to that of a 316L stainless steel
- Q2 Lot® - Certificates showing actual wire chemistry available online
Applications typiques
- Used for the first layer of multilayer overlays with filler metals such as 316L or 317L stainless steel
Positions de soudage
- Not applicable
Gaz de protection
- N/A
Disclaimers
Des informations de service
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| ISO | ISO 14343-A | S 23 12 2 L |
WIRE COMPOSITION
| Classification | %C | %Cr | %Cu | %Mn | %Mo | %N | %Ni | %P | %S | %Si | Ferrite Number (WRC-1992 ©) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| S 23 12 2 L Requirement | 0.03 max. | 21.0 - 25.0 | 0.5 max. | 1.0 - 2.5 | 2.0 - 3.5 | Info. Only | 11.0 - 15.5 | 0.03 max. | 0.02 max. | 1.0 max. | |
| Typical Result | 0.01 | 21.4 | 0.1 | 1.4 | 2.6 | 0.06 | 14.9 | 0.02 | 0.00 | 0.4 | 9 |
TYPICAL OPERATING PROCEDURES
| Flux | Diameter |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|
| Lincolnweld® P2007™ | 3/32" (2.4 mm) | 28-33 | 275-350 |