Menu Close
Lincolnweld 308/308L Stainless

Diameters / Packaging

Diameters
 55 lb Spool
3/32 in (2.4 mm) ED035171

Lincolnweld® 309LMo_MOD Submerged Arc (SAW) Wire

Submerged Arc Welding (SAW) | ED035171

AWS:
Similar to AWS A5.9 : ER309LMo
ISO 14343-A : S 23 12 2 L

Used for the first layer of multilayer overlays with filler metals such as 316L or 317L stainless steel

Diamètre

Sélectionnez le diamètre

  • 3/32 in (2.4 mm)

Paquet

Sélectionnez un forfait

  • 55 lb Spool
Acheter maintenant

Détails

LINCOLNWELD® 309LMo_MOD is often used for surfacing base metals to improve their resistance to corrosion, and is used to achieve a single-layer overlay with a chemical composition similar to that of a 316L stainless or as a butter pass before overlaying with 347 nickel.

Traits

  • Similar to 309 with the exception of the addition of 2.0 - 3.0% molybdenum to increase its pitting corrosion resistance in halide containing environments
  • For surfacing of base metals to improve their resistance to corrosion
  • Used to achieve a single-layer overlay with a chemical composition similar to that of a 316L stainless steel
  • Q2 Lot® - Certificates showing actual wire chemistry available online

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
ISO ISO 14343-A S 23 12 2 L

WIRE COMPOSITION

Classification %C %Cr %Cu %Mn %Mo %N %Ni %P %S %Si Ferrite Number (WRC-1992 ©)
S 23 12 2 L Requirement 0.03 max. 21.0 - 25.0 0.5 max. 1.0 - 2.5 2.0 - 3.5 Info. Only 11.0 - 15.5 0.03 max. 0.02 max. 1.0 max.
Typical Result 0.01 21.4 0.1 1.4 2.6 0.06 14.9 0.02 0.00 0.4 9

TYPICAL OPERATING PROCEDURES

Flux Diameter Voltage
volts 		Approx. Current
amps
Lincolnweld® P2007™ 3/32" (2.4 mm) 28-33 275-350