Détails
LINCOLNWELD® 310 produces a fully austenitic weld deposit, low heat inputs are required to prevent cracking, often used for welding stainless steels of similar composition in cast and wrought forms.
Traits
- Austenitic stainless for high temperatures and heat resistant applications
- Used for welding stainless steels of similar composition in cast and wrought forms
- The weld deposit is fully austenitic, low heat inputs required to prevent cracking
- Q2 Lot® - Certificates showing actual wire chemistry available online
Disclaimers
Des informations de service
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.9 | ER310 |
| ABS | AWS A5.9 | ER310 |
| CWB | CSA W48 | ER310 |
| MIL | MIL-E-19933E AMD1 | MIL-310 |
WIRE COMPOSITION
| Classification | %C | %Cr | %Cu | %Mn | %Mo | %N | %Nb | %Ni | %P | %S | %Si |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ER310 Requirement | 0.08 - 0.15 | 25.0 - 28.0 | 0.75 max. | 1.0 - 2.5 | 0.75 max. | Info. Only | Info. Only | 20.0 - 22.5 | 0.03 max. | 0.03 max. | 0.30 - 0.65 |
| Typical Result | 0.11-0.12 | 25.7-26.0 | 0.02-0.07 | 1.5-1.8 | 0.07-0.13 | 0.01-0.03 | 0.01 max. | 20.8-21.2 | 0.01 | 0.003 max. | 0.38-0.40 |
TYPICAL OPERATING PROCEDURES
| Flux | Diameter |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|
| Lincolnweld® P2007™ | 3/32" (2.4 mm) | 28-33 | 275-350 |