Menu Close
Lincolnweld 308/308L Stainless

Diameters / Packaging

Diameters
 55 lb Coil
1/8 in (3.2 mm) ED034932
3/32 in (2.4 mm) ED034931
5/64 in (2.0 mm) ED034930

Lincolnweld® 316/316LCF Submerged Arc (SAW) Wire

Submerged Arc Welding (SAW) | ED034930

AWS:
AWS A5.9 : ER316
AWS A5.9 : ER316L

Controlled Low Ferrite (Range 3-5)

Diamètre

Sélectionnez le diamètre

  • 1/8 in (3.2 mm)
  • 3/32 in (2.4 mm)
  • 5/64 in (2.0 mm)

Paquet

Sélectionnez un forfait

  • 55 lb Coil
Acheter maintenant

Détails

LINCOLNWELD® 316/316LCF consumables have a controlled low ferrite (range 3-5), and are capable of producing Charpy V-Notch test results exceeding 27 J (20 ft•lbf) and lateral expansion values exceeding 15 mils (0.38mm) at service temperatures down to -196°C (-320°F).

Traits

  • Controlled Low Ferrite (Range 3-5)
  • Charpy V-Notch test results capable of exceeding 27 J (20 ft•lbf) @ -196°C (-320°F)
  • Exceeds 15 mils (0.38 mm) of lateral expansion at -196°C (-320°F)
  • Batch Managed Inventory
  • Q2 Lot® - Certificate showing deposit composition, ferrite number, and charpy impact properties tested at -196C(-320F)

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.9 ER316, ER316L

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -196°C (-320°F) 		Lateral Expansion
mil @ -196 °C (-320 °F) 		Flux
Typical Result 430 (62) 590 (85) 34 47 (35) 21 Lincolnweld® P2007™

WIRE COMPOSITION

Classification %C %Cr %Cu %Mn %Mo %N %Nb %Ni %P %S %Si Ferrite Number (Delong ©) Ferrite Number (WRC-1992 ©)
ER316 Requirement 0.08 max. 18.0 - 20.0 0.75 max. 1.0 - 2.5 2.0 - 3.0 Info. Only Info. Only 11.0 - 14.0 0.03 max. 0.03 max. 0.30 - 0.65 Info. Only Info. Only
ER316L Requirement 0.03 max. 18.0 - 20.0 0.75 max. 1.0 - 2.5 2.0 - 3.0 Info. Only Info. Only 11.0 - 14.0 0.03 max. 0.03 max. 0.30 - 0.65 Info. Only Info. Only
Typical Result 0.02 18.4-18.7 0.11-0.18 1.8 2.5-2.7 0.05-0.06 0.01 12.3-13.3 0.02 0.01 0.35-0.40 4-6 4-5

TYPICAL OPERATING PROCEDURES

Diameter Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps
5/64" (2.0 mm) 2.0-6.1 (80-240) 24-30 190-500
3/32" (2.4 mm) 1.5-5.3 (60-210) 26-32 195-575
1/8" (3.2 mm) 0.9-2.8 (35-110) 28-34 200-700
Lincolnweld® P2007™
Lincolnweld® P2007™
Lincolnweld® P2007™