Diameters / Packaging

Diameters	55 lb Spool
1/8 in (3.2 mm)	ED035188

Lincolnweld® 410NiMo

Submerged Arc Welding (SAW)

AWS:
AWS A5.9 : ER410NiMo

LINCOLNWELD® 410NiMo Submerged Arc Wire is designed for welding materials of similar chemical composition in cast and wrought forms.

Partenaire commercial Lincoln Electric?

Connectez-vous pour voir votre prix

Acheter maintenant

Détails

LINCOLNWELD® 410NiMo is used to overlay mild and low alloy steels, a preheat and inter-pass temperature of 300°F (150°C) or greater are recommended during welding. Additionally post-weld heat treatment should not exceed 1150°F (620°C) as higher temperatures may result in hardening.

Traits

Used to overlay mild and low alloy steels
Preheat and inter-pass temperatures of 300°F (150°C) or greater are recommended during welding
Post-weld heat treatment should not exceed 1150°F (620° C) as higher temperatures may result in hardening
Q2 Lot® - Certificates showing actual wire chemistry available online

Applications typiques

Turbines
Valve Bodies
High Pressure Piping
Offshore
Power Generation

Positions de soudage

Not applicable

Gaz de protection

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES	SPECIFICATION	CLASSIFICATION
AWS	AWS A5.9	ER410NiMo

WIRE COMPOSITION

Classification	%C	%Cr	%Cu	%Mn	%Mo	%N	%Nb	%Ni	%P	%S	%Si
ER410NiMo Requirement	0.06 max.	11.0 - 12.5	0.75 max.	0.6 max.	0.4 - 0.7	Info. Only	Info. Only	4.0 - 5.0	0.03 max.	0.03 max.	0.5 max.
Typical Result	0.02-0.03	11.8-12.1	0.04-0.06	0.4-0.5	0.5-0.6	0.02-0.05	0.00 max.	4.5-4.7	0.01-0.02	0.01 max.	0.4

TYPICAL OPERATING PROCEDURES

Diameter	Voltage volts	Approx. Current amps	Flux
1/8 in (3.2 mm)	29-32	350-450	Lincolnweld® P2000™