Menu Close
Lincolnweld 308/308L Stainless

Diameters / Packaging

Diameters
 55 lb Spool
1/8 in (3.2 mm) ED035188

Lincolnweld® 410NiMo Submerged Arc (SAW) Wire

Submerged Arc Welding (SAW) | ED035188

AWS:
AWS A5.9 : ER410NiMo

Used to overlay mild and low alloy steels

Diamètre

Sélectionnez le diamètre

  • 1/8 in (3.2 mm)

Paquet

Sélectionnez un forfait

  • 55 lb Spool
Acheter maintenant

Détails

LINCOLNWELD® 410NiMo is used to overlay mild and low alloy steels, a preheat and inter-pass temperature of 300°F (150°C) or greater are recommended during welding. Additionally post-weld heat treatment should not exceed 1150°F (620°C) as higher temperatures may result in hardening.

Traits

  • Used to overlay mild and low alloy steels
  • Preheat and inter-pass temperatures of 300°F (150°C) or greater are recommended during welding
  • Post-weld heat treatment should not exceed 1150°F (620° C) as higher temperatures may result in hardening
  • Q2 Lot® - Certificates showing actual wire chemistry available online

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.9 ER410NiMo

WIRE COMPOSITION

Classification %C %Cr %Cu %Mn %Mo %N %Nb %Ni %P %S %Si
ER410NiMo Requirement 0.06 max. 11.0 - 12.5 0.75 max. 0.6 max. 0.4 - 0.7 Info. Only Info. Only 4.0 - 5.0 0.03 max. 0.03 max. 0.5 max.
Typical Result 0.02-0.03 11.8-12.1 0.04-0.06 0.4-0.5 0.5-0.6 0.02-0.05 0.00 max. 4.5-4.7 0.01-0.02 0.01 max. 0.4

TYPICAL OPERATING PROCEDURES

Diameter Voltage
volts 		Approx. Current
amps 		Flux
1/8 in (3.2 mm) 29-32 350-450 Lincolnweld® P2000™