Détails
LINCORE® 30-S is developed for build-up on tractor rollers, trunnions, idlers and crane wheels before final overlay, and as a final surface for improved resistance, offers moderate impact on shafts, track rails and idlers hardfacing application with unlimited deposit layers and very high quality of weld metal.
Traits
- Intended for build-up before final overlay, and as a final surface for metal-to-metal wear with moderate impact
- For automatic and semiautomatic operation on mild and low alloy steels
- Good resistance to cross checking
- Unlimited deposit thickness with proper preheat and interpass temperatures and procedures
Disclaimers
Des informations de service
Vous pourriez également avoir besoin
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
MECHANICAL PROPERTIES
| Flux | Classification | Number of layer | Hardness Rockwell C |
|---|---|---|---|
| Lincolnweld® 801® | Typical Result | 6 | 27 |
DEPOSIT COMPOSITION
| Flux | Classification | %C | %Mn | %Mo | %Si |
|---|---|---|---|---|---|
| Lincolnweld® 801® | Typical Result | 0.11 | 2.5 | 0.5 | 0.4 |
| Lincolnweld® 801® | Typical Result | 0.11 | 2.5 | 0.5 | 0.4 |
| Lincolnweld® 801® | Typical Result | 0.11 | 2.7 | 0.5 | 0.6 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|---|
| 3/32 in (2.4 mm) | DC+ | 1.5 (60) | 26 | 220 |
| 3/32 in (2.4 mm) | DC+ | 3.0 (120) | 27 | 360 |
| 3/32 in (2.4 mm) | DC+ | 4.6 (180) | 28 | 500 |
| 1/8 in (3.2 mm) | DC+ | 1.3 (50) | 27 | 310 |
| 1/8 in (3.2 mm) | DC+ | 2.0 (80) | 28 | 450 |
| 1/8 in (3.2 mm) | DC+ | 2.8 (110) | 28 | 600 |