Menu Close
33 lb Steel Spool Outershield MC-409 Flux-Cored Wire

Diameters / Packaging

Diameters
 10 lb (4.5 kg) Plastic Spool
 25 lb (11.3 kg) Plastic Spool
 50 lb (22.7 kg) Coil
 50 lb (22.7kg) Coil
 125 lb (56.7 kg) Speed-Feed® Drum
0.045 in (1.1 mm) ED037270 ED031123
1/16 in (1.6 mm) ED037261 ED031124 ED020829
5/64 in (2.0 mm) ED031125 ED017825
7/64 in (2.8 mm) ED011275 ED011274

Lincore® 50 Flux-Cored (FCAW-S) Wire

Flux-Cored Self-Shielded (FCAW-S) | ED031124

LINCORE® 50 Flux-Cored Self-Shielded Wire is designed for crusher rolls, dredge cutter teeth, ore chute baffles, muller plows, tires and coal mining cutting teeth applications (Metal to Earth)

Diamètre

Sélectionnez le diamètre

  • 0.045 in (1.1 mm)
  • 1/16 in (1.6 mm)
  • 5/64 in (2.0 mm)
  • 7/64 in (2.8 mm)

Paquet

Sélectionnez un forfait

  • 10 lb (4.5 kg) Plastic Spool
  • 25 lb (11.3 kg) Plastic Spool
  • 50 lb (22.7 kg) Coil
Acheter maintenant

Détails

LINCORE® 50 Flux-Cored ideal for low carbon, medium carbon, low alloy, manganese and stainless steels delivers an abrasion resistant, even under conditions of moderate impact deposit with a Rockwell Hardness range of 34-56 (HRC) limited to deposit of four layers.

Traits

  • Delivers an abrasion resistant deposit, even under conditions of moderate impact
  • Larger wire diameter sizes may be used for the submerged arc process
  • Can be used on low carbon, medium carbon, low alloy, manganese and stainless steels
  • Limited to 4 layers

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

Vous pourriez également avoir besoin

Lincore BU 125 lb drum

Lincore® 50 Flux-Cored (FCAW-S) Wire

ED011274
50lb Coil Ultracore 70C

Lincore® 50 Flux-Cored (FCAW-S) Wire

ED011275
50lb Coil Ultracore 70C

Lincore® 50 Flux-Cored (FCAW-S) Wire

ED017825
50lb Coil Ultracore 70C

Lincore® 50 Flux-Cored (FCAW-S) Wire

ED020829
Voir tout

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

MECHANICAL PROPERTIES

Classification Base Metal Number of layer Hardness Rockwell C
Typical Result Mild Steel 1 Layer 34-37
Typical Result Mild Steel 2 Layers 44-48
Typical Result Mild Steel 3 Layers 48-52
Typical Result 0.50% Carbon Steel 1 Layer 41-43
Typical Result 0.50% Carbon Steel 2 Layers 47-50
Typical Result 0.50% Carbon Steel 3 Layers 50-53
Typical Result Austenitic Mn Steel 2 Layers 43-45
Typical Result Austenitic Mn Steel 3 Layers 48-50

DEPOSIT COMPOSITION

Classification Product Size %Al %C %Cr %Mn %Mo %Si
Typical Result .045" (1.1 mm) 0.6 2.4 11.4 1.3 0.0 1.0
Typical Result 1/16" (1.6 mm) 0.6 2.4 11.4 1.3 0.0 1.0
Typical Result 5/64" (2.0 mm) 0.6 2.0 9.2 0.9 0.5 1.0
Typical Result 7/64" (2.8 mm) 0.6 2.0 9.2 0.9 0.5 1.0

TYPICAL OPERATING PROCEDURES

Diameter Polarity ESO
mm (in.) 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Deposition Rate
kg/hr (lb/hr)
.045" (1.1 mm) DC+ 25 (1) 5.1 (200) 19-21 120 1.9 (4.2)
.045" (1.1 mm) DC+ 25 (1) 10.2 (400) 23-25 190 3.9 (8.5)
.045" (1.1 mm) DC+ 25 (1) 15.2 (600) 27-29 250 5.8 (12.8)
1/16" (1.6 mm) DC+ 25 (1) 3.8 (150) 22-24 175 2.7 (5.9)
1/16" (1.6 mm) DC+ 25 (1) 8.9 (350) 29-31 325 6.2 (13.6)
1/16" (1.6 mm) DC+ 25 (1) 11.4 (450) 32-34 365 7.9 (17.5)
5/64" (2.0 mm) DC+ 32 (1) 3.2 (125) 27 210 3.4 (7.4)
5/64" (2.0 mm) DC+ 32 (1) 5.1 (200) 31 325 5.4 (11.9)
5/64" (2.0 mm) DC+ 32 (1) 6.4 (250) 33 380 6.8 (14.9)
7/64" (2.8 mm) DC+ 32 (1) 2.0 (80) 26 315 3.9 (8.6)
7/64" (2.8 mm) DC+ 32 (1) 2.5 (100) 27 375 4.9 (10.7)
7/64" (2.8 mm) DC+ 32 (1) 3.3 (130) 29 450 6.4 (14.0)
7/64" (2.8 mm) DC+ 64 (2) 2.5 (100) 27 315 4.9 (10.7)
7/64" (2.8 mm) DC+ 64 (2) 3.3 (130) 29 370 6.4 (14.0)
7/64" (2.8 mm) DC+ 64 (2) 4.4 (175) 31 450 8.6 (19.0)