Détails
MUREX® 308LSi is similar in composition to 308L with higher silicon content to increase puddle fluidity and improve the bead appearance.
Traits
- Similar in composition to 308L with higher silicon content to increase puddle fluidity and improve the bead appearance
- Used to primarily weld equipment made with 304 type stainless steel
- Q2 Lot® - Certificate showing actual wire composition and calculated ferrite number (FN) available online
Disclaimers
Des informations de service
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.9 | ER308LSi, ER308Si |
| CWB | CSA W48 | ER308LSi |
WIRE COMPOSITION
| Classification | %C | %Cr | %Cu | %Mn | %Mo | %N | %Nb | %Ni | %P | %S | %Si | Ferrite Number (Delong ©) | Ferrite Number (WRC-1992 ©) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ER308LSi Requirement | 0.03 max. | 19.5 - 22.0 | 0.75 max. | 1.0 - 2.5 | 0.75 max. | Info. Only | Info. Only | 9.0 - 11.0 | 0.03 max. | 0.03 max. | 0.65 - 1.00 | Info. Only | Info. Only |
| ER308Si Requirement | 0.08 max. | 19.5 - 22.0 | 0.75 max. | 1.0 - 2.5 | 0.75 max. | Info. Only | Info. Only | 9.0 - 11.0 | 0.03 max. | 0.03 max. | 0.65 - 1.00 | Info. Only | Info. Only |
| Typical Result | 0.02 | 19.8 | 0.07 | 1.9 | 0.12 | 0.06 | 0.01 | 9.5 | 0.02 | 0.03 | 0.77 | 14 | 12 |