Menu Close
Outershield Wire, 25 LB Plastic Spool

Diameters / Packaging

Diameters
 10 lb Spool
 25 lb Spool
 33 lb Spool
 50 lb Coil
 500 lb Accu-Trak® Drum
 600 lb Speed Feed® Reel
0.035 in (0.9 mm) ED026804 ED026805
0.045 in (1.1 mm) ED020836 ED022659 ED030007 ED020844 ED027364
0.052 in (1.3 mm) ED022660 ED030008 ED020845 ED029778
1/16 in (1.6 mm) ED022661 ED030009 ED020846 ED029779 ED020851

Outershield® 71M

Flux-Cored Gas-Shielded (FCAW-G) | ED022659

AWS:
E71T-9C-J
E71T-9M-J
E71T1-C1A4-CS1-H16
E71T1-M21A4-CS1-H16

L'Outershield® 71M de Lincoln Electric présente de bonnes performances dans tous les domaines - depuis une excellente capacité d'alimentation jusqu’à de bonnes performances d'arc.

Diamètre

Sélectionnez le diamètre

  • 0.035 in (0.9 mm)
  • 0.045 in (1.1 mm)
  • 0.052 in (1.3 mm)
  • 1/16 in (1.6 mm)

Paquet

Sélectionnez un forfait

  • 10 lb Spool
  • 25 lb Spool
  • 33 lb Spool
  • 50 lb Coil
  • 500 lb Accu-Trak® Drum
Acheter maintenant

Détails

Une performance globale - de son excellente capacité d'alimentation jusqu’à de bonnes performances d'arc. Aucune pince à tranchant latéral n'est nécessaire pour redémarrer, il suffit de casser le fil entre vos mains - c'est aussi simple que cela.

Traits

  • Double classification pour du CO2 à 100 % et un mélange gazeux de 75 % d’argon/25 % de CO2
  • Résistance aux chocs Charpy V-Notch testée jusqu'à -40 °C (-40 °F)
  • Vitesses de déplacement élevées
  • Transfert par pulvérisation avec des éclaboussures minimes
  • Fabrication à base de baguettes pour une rigidité et une capacité d'alimentation de fil de pointe
  • Increased rigidity allows for easy manual break-off

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

Vous pourriez également avoir besoin

Magnum 400 MIG Gun

Magnum® 400 Welding Guns

K471-21
Innershield Flux Cored wire, 25 or 30 lb steel spool

Innershield® NR® -211-MP

ED030638
UltraCore, 33 LB fiber spool

UltraCore® 71A85 Flux-cored (FCAW-G) Wire

ED031663
Excalibur 7018 MR 14 stick electrode"

Excalibur® 7018 MR®

ED032589
Voir tout

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.20 E71T-1C-J, E71T-1C-JH16, E71T-1M-J, E71T-1M-JH16, E71T-9C-J, E71T-9C-JH16, E71T-9M-J, E71T-9M-JH16
AWS AWS A5.36 E71T1-C1A4-CS1-H16, E71T1-M21A4-CS1-H16
ABS ABS - Part 2 3YSA, 3YSA H15
BV BV - Chapter 5 SA3YH
CWB CSA W48 E491T1-C1A4-CS1-H16, E491T1-M21A4-CS1-H16, E491T-9J-H16, E491T-9MJ-H16
DNV-GL DNV - 2.9 III YMS H10
LR LR - Chapter 11 3YS H15
MIL MIL-E-24403/1D MIL-71T-1C, MIL-71T-1M

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -20°C (0°F) 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F)
E71T-9C-JH16 Requirement 100% CO2 DC+ 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
E71T-9M-JH16 Requirement 75-80% Ar, balance CO2 DC+ 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
E71T1-C1A4-CS1-H16 Requirement 100% CO2 DC+ 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
E71T1-M21A4-CS1-H16 Requirement M21-ArC DC+ 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
Typical Result, As-welded 100% CO2 DC+ 470 (68) 540-600 (78-87) 26 176-224 (130-165) 167-184 (123-136) 68-174 (50-128)
Typical Result, As-welded 75% Ar, 25% CO2 DC+ 540 (78) 630-650 (91-94) 23 148-155 (109-114) 133-142 (98-105) 103-148 (76-109)

DEPOSIT COMPOSITION

Classification Shielding Gas Polarity %B %C %Mn %P %S %Si Diffusible Hydrogen
mL/100g Weld Metal
E71T-9C-JH16 Requirement 100% CO2 DC+ 0.12 max. 1.75 max. 0.03 max. 0.03 max. 0.90 max. 16.0 max.
E71T-9M-JH16 Requirement 75-80% Ar, balance CO2 DC+ 0.12 max. 1.75 max. 0.03 max. 0.03 max. 0.90 max. 16.0 max.
E71T1-C1A4-CS1-H16 Requirement 100% CO2 DC+ 0.12 max. 1.75 max. 0.030 max. 0.030 max. 0.90 max. 16 max.
E71T1-M21A4-CS1-H16 Requirement M21-ArC DC+ 0.12 max. 1.75 max. 0.030 max. 0.030 max. 0.90 max. 16 max.
Typical Result 100% CO2 DC+ 0.0039-0.0053 0.05-0.07 1.15-1.36 0.014 max. 0.014 max. 0.31-0.41
Typical Result 75% Ar, 25% CO2 DC+ 0.0049-0.0059 0.06-0.08 1.43-1.61 0.014 max. 0.014 max. 0.46-0.53 9.8

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas⁽¹⁾ Polarity CTWD
mm (in.)⁽²⁾ 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr) 		Deposition Rate
kg/hr (lb/hr) 		Efficiency
%
0.035 in (0.9 mm) 100% CO2 DC+ 19-25 (3/4-1) 5.1 (200) 20-23 95 1.3 (2.8) 1.1 (2.8) 85
0.035 in (0.9 mm) 100% CO2 DC+ 19-25 (3/4-1) 6.4 (250) 21-24 115 1.6 (3.5) 1.4 (3.5) 85
0.035 in (0.9 mm) 100% CO2 DC+ 19-25 (3/4-1) 7.6 (300) 22-25 130 1.9 (4.2) 1.6 (4.2) 86
0.035 in (0.9 mm) 100% CO2 DC+ 19-25 (3/4-1) 8.9 (350) 23-26 150 2.2 (4.9) 1.9 (4.9) 86
0.035 in (0.9 mm) 100% CO2 DC+ 19-25 (3/4-1) 10.2 (400) 24-27 160 2.6 (5.6) 2.2 (5.6) 86
0.035 in (0.9 mm) 100% CO2 DC+ 19-25 (3/4-1) 12.7 (500) 26-29 185 3.2 (7.0) 2.7 (7.0) 86
0.035 in (0.9 mm) 100% CO2 DC+ 19-25 (3/4-1) 15.2 (600) 28-31 200 3.8 (8.4) 3.3 (8.4) 86
0.035 in (0.9 mm) 100% CO2 DC+ 19-25 (3/4-1) 17.8 (700) 30-33 215 4.4 (9.8) 3.8 (9.8) 86
0.045 in (1.1 mm) 100% CO2 DC+ 19-25 (3/4-1) 5.1 (200) 23-26 165 2.1 (4.6) 1.8 (3.9) 83
0.045 in (1.1 mm) 100% CO2 DC+ 19-25 (3/4-1) 6.4 (250) 24-27 190 2.6 (5.8) 2.2 (4.8) 84
0.045 in (1.1 mm) 100% CO2 DC+ 19-25 (3/4-1) 7.6 (300) 25-28 220 3.1 (6.9) 2.6 (5.8) 84
0.045 in (1.1 mm) 100% CO2 DC+ 19-25 (3/4-1) 8.9 (350) 26-29 245 3.7 (8.1) 3.1 (6.8) 84
0.045 in (1.1 mm) 100% CO2 DC+ 19-25 (3/4-1) 10.2 (400) 26-29 265 4.2 (9.2) 3.5 (7.8) 84
0.045 in (1.1 mm) 100% CO2 DC+ 19-25 (3/4-1) 12.7 (500) 28-31 295 5.2 (11.5) 4.4 (9.7) 84
0.045 in (1.1 mm) 100% CO2 DC+ 19-25 (3/4-1) 15.2 (600) 30-33 315 6.3 (13.8) 5.3 (11.7) 85
0.045 in (1.1 mm) 100% CO2 DC+ 19-25 (3/4-1) 17.8 (700) 32-35 325 7.3 (16.1) 6.2 (13.7) 85
0.052 in (1.3 mm) 100% CO2 DC+ 19-25 (3/4-1) 3.8 (150) 22-25 150 2.1 (4.7) 1.7 (3.8) 81
0.052 in (1.3 mm) 100% CO2 DC+ 19-25 (3/4-1) 5.1 (200) 23-26 180 2.8 (6.2) 2.3 (5.1) 83
0.052 in (1.3 mm) 100% CO2 DC+ 19-25 (3/4-1) 6.4 (250) 24-27 210 3.5 (7.7) 2.9 (6.5) 83
0.052 in (1.3 mm) 100% CO2 DC+ 19-25 (3/4-1) 7.6 (300) 25-28 235 4.2 (9.3) 3.5 (7.8) 84
0.052 in (1.3 mm) 100% CO2 DC+ 19-25 (3/4-1) 8.9 (350) 27-30 265 4.9 (10.8) 4.2 (9.1) 84
0.052 in (1.3 mm) 100% CO2 DC+ 19-25 (3/4-1) 11.4 (450) 29-32 305 6.3 (13.9) 5.4 (11.8) 85
0.052 in (1.3 mm) 100% CO2 DC+ 19-25 (3/4-1) 12.7 (500) 30-33 325 7.0 (15.5) 6.0 (13.2) 85
0.052 in (1.3 mm) 100% CO2 DC+ 19-25 (3/4-1) 15.2 (600) 33-36 360 8.4 (18.6) 7.2 (15.8) 85
1/16 in (1.6 mm) 100% CO2 DC+ 19 (3/4) 3.2 (125) 23-26 205 2.5 (5.4) 2.0 (4.5) 82
1/16 in (1.6 mm) 100% CO2 DC+ 19 (3/4) 3.8 (150) 24-27 225 3.0 (6.5) 2.4 (5.4) 82
1/16 in (1.6 mm) 100% CO2 DC+ 19 (3/4) 5.1 (200) 25-28 260 4.0 (8.7) 3.3 (7.2) 83
1/16 in (1.6 mm) 100% CO2 DC+ 19 (3/4) 6.4 (250) 26-29 295 4.9 (10.9) 4.1 (9.1) 83
1/16 in (1.6 mm) 100% CO2 DC+ 19 (3/4) 7.6 (300) 28-31 330 5.9 (13.0) 5.0 (10.9) 84
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 10.2 (400) 30-33 395 7.9 (17.4) 6.6 (14.6) 84
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 12.7 (500) 33-36 445 9.9 (21.7) 8.3 (18.3) 84

NOTES

Note
⁽¹⁾ When welding under mixed gas, decrease voltage.
⁽²⁾ To estimate ESO, subtract 1/4 in. (6.0 mm) from CTWD.