Détails
Conçu pour le soudage vertical vers le bas de tuyaux de pipeline et d’usine.
Traits
- Q2 Lot® Control and Tested - Certificat de lot disponible en ligne.
- Excellentes propriétés d'impact sans ajout intentionnel de bore
- Flaque de soudure propre et visible
- Contrôle supérieur des flaques
Disclaimers
Des informations de service
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.5 | E8010-G, E8010-P1 |
| CWB | CSA W48 | E5510-P1 |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
Charpy V-Notch
J (ft-lbs) @ -45°C (-50°F) |
Hardness Rockwell B |
|---|---|---|---|---|---|---|
| E8010-P1 Requirement | 460 (67) min. | 550 (80) min. | 19 min. | 27 (20) min. | ||
| Typical Result, As-welded | 460-540 (67-78) | 550-650 (80-94) | 19-29 | 51-114 (38-84) | 34-93 (25-69) | 86-98 |
DEPOSIT COMPOSITION
| Classification | %B | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %V |
|---|---|---|---|---|---|---|---|---|---|---|
| E8010-P1 Requirement | 0.20 max. | 0.30 max. | 1.20 max. | 0.50 max. | 1.00 max. | 0.03 max. | 0.03 max. | 0.60 max. | 0.10 max. | |
| Typical Result | 0.0002 max. | 0.12-0.20 | 0.01-0.05 | 0.59-0.97 | 0.09-0.20 | 0.60-1.00 | 0.01 max. | 0.01 | 0.09-0.23 | 0.01 |
TYPICAL OPERATING PROCEDURES
| Classification⁽²⁾ | Polarity⁽¹⁾ |
Current
Amps |
|---|---|---|
| 4.0 mm (5/32 in) | DC+ | 100-165 |
| 3/16 in | DC+ | 125-205 |
| 5.0 mm | DC+ | 130-210 |
NOTES
| Note |
|---|
| ⁽¹⁾ Preferred polarity is listed first. |
| ⁽²⁾ Size 3/16 in. is manufactured to US standard units |