Menu Fermer
SuperArc MIG wire, 33 lb. Plastic spool

Diamètres / Emballages

Diamètres
 33 lb Spool
1,0 mm (0,040 in) ED036532

Pipeliner® 70S-6

Soudage MIG/MAG (GMAW)

CLASSIFICATION:
ER70S-6

Pipeliner® 70S-6 from Lincoln Electric is an engineered alloy providing superior impact toughness at low temperatures.

Diamètre

Sélectionnez le diamètre

  • 1,0 mm (0,040 in)

Emballage

Sélectionnez l'emballage

  • 33 lb Spool

DÉTAILS

An engineered alloy providing superior impact toughness at low temperatures.

Caractéristiques

  • An engineered alloy providing superior impact toughness at low temperatures
  • Microguard® Ultra provides superior feeding and arc stability
  • ProTech® packaging system

Exemples d'applications

  • Root pass welding
  • Hot, fill and cap pass welding of up to X70 grade pipe

Positions de soudage

  • All

Gaz de protection

  • Mixed Shielding Gas|100% CO2

Service d'information

Vous pourriez avoir également besoin de

Lincoln Electric MIG Wire

Pipeliner ® 80Ni1

ED033119
Lincoln Electric MIG Wire

Pipeliner® 80Ni1 MIG (GMAW) Wire

ED033120
Drive Roll and Guide Tube Kit

Kit galets d’entraînement (2R) 1.1 mm - Fils pleins

KP1696-045S
Magnum Pro 250L Gun

Buse Magnum® PRO - 350A, Filetage, Encoche, 5/8 in (15,9 mm) ID

KP2742-1-62R
Magnum Pro Tapered Contact tip

Tube contact Copper Plus® - 350A, Standard, 0,045 in (1,2 mm) - 10/PACK

KP2744-045
Magnum Pro Gas Diffuser

Diffuseur Magnum® PRO - 350A, Filetage

KP2746-1

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Page de recherche SDS

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.18 ER70S-6
ABS ABS - Part 2 3YSA
TUV TUV ISO 14341-A G 42 3 C1 3Si1, G 46 4 M21 3Si1, G 46 4 M31 3Si1

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
ER70S-6 Requirement 100% CO2 DC+ 400 (58) min. 480 (70) min. 22 min. 27 (20) min.
Typical Result, As-welded 100% CO2 DC+ 470 (68) 580 (84) 28 81-95 (60-70)

WIRE COMPOSITION

Classification %C %Cr %Mn %Ni %P %S %Si %V %Total Cu
ER70S-6 Requirement 0.06 - 0.15 0.15 max. 1.40 - 1.85 0.15 max. 0.025 max. 0.035 max. 0.80 - 1.15 0.03 max. 0.50 max.
Typical Result 0.10 0.03 1.46 0.01 0.005 0.009 0.82 0.003 max. 0.17

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Polarity CTWD
mm (in.)⁽¹⁾ 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr)
1.0 mm (0.040 in) 75-95% Ar / balance CO2 DC+ 12-19 (1/2-3/4) 2.5-14.0 (100-550) 19-31 105-320 1.0-5.2 (2.1-11.5)
1.2 mm (0.047 in) 75-95% Ar / balance CO2 DC+ 12-19 (1/2-3/4) 3.2-12.7 (125-500) 19-31 145-360 1.7-6.5 (3.7-14.3)

NOTES

Note
⁽¹⁾ CTWD (Contact Tip to Work Distance). Subtract 1/4 in. (6.4 mm) to calculate Electrical Stickout.