DÉTAILS
Le SuperGlaze 5356 est notre fil MIG en aluminium le plus populaire. C’est un excellent alliage d’apport à usage général conçu pour le soudage des alliages de la série 5000 lorsqu’une résistance à la traction de 276 MPa (40 000 psi) n’est pas requise.
Caractéristiques
- Fil 5356 premium
- Conçu pour les applications de soudage semi-automatique
- Arc stable et contrôle aisé du bain de fusion
- Best feeding performance - reduced shavings
Exemples d'applications
- Fabrication de remorques
- Panneaux de camion
- Structures dans la construction navale
- Structural frames in the shipbuilding industry
Gaz de protection
- I1 : Gaz inerte Ar (100 %), I3 : Mélanges Argon / Hélium, Débit :14-24 l/min (Argon)
Caractéristiques spéciales
- Q2 Lot® Certificate - Certified Material Test Report showing actual wire composition
Service d'information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Page de recherche SDS
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.10 | ER5356 |
MECHANICAL PROPERTIES
| Classification | Shielding Gas | Polarity |
Tensile Strength
MPa (ksi) |
|---|---|---|---|
| ER5356 Requirement | Not Specified | Not Specified | 240 (35) min. |
| Typical Result, As-welded | 100% Ar | DC+ | 250-290 (36-42) |
WIRE COMPOSITION
| Classification | %Al | %Be | %Cr | %Fe | %Mg | %Mn | %Si | %Ti | %Total Cu | %Zn |
|---|---|---|---|---|---|---|---|---|---|---|
| ER5356 Requirement | Remainder | 0.0003 max. | 0.05 - 0.20 | 0.40 max. | 4.5 - 5.5 | 0.05 - 0.20 | 0.25 max. | 0.06 - 0.20 | 0.10 max. | 0.10 max. |
| Typical Result | Remainder | 0.0002 | 0.12 | 0.09 | 4.9 | 0.12 | 0.06 | 0.09 | 0.00 | 0.00 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas |
Gas Flow
L/min (CFH) |
Polarity |
CTWD
mm (in.) |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|---|---|---|---|
| Typical Result | 100% Ar | 25 (53) | DC+ | 16 (⁵/₈) | 18 (709) | 23.3 | 180 |
| Typical Result | 100% Ar | 25 (53) | DC+ | 16 (⁵/₈) | 13 (512) | 24.3 | 210 |
| Typical Result | 100% Ar | 25 (53) | DC+ | 19 (³/₄) | 9 (354) | 25.1 | 280 |