Menu Close
50lb Coil Ultracore 70C

Diameters / Packaging

Diameters
 11.3 KG SPOOL
 22.7 KG COIL
1.1 mm ED031131
1.6 mm ED031132
2.0 mm ED019887
5/64 in (2.0 mm) ED031133

Lincore® 60-O

Flux-Cored Self-Shielded (FCAW-S) | ED019887

LINCORE® 60-O Flux-Cored Self-Shielded Wire is designed for bucket lips, crusher hammers, ore chutes, dozer blades and ripper teeth applications (Metal to Earth)

Diameter

Select Diameter

  • 1.1 mm
  • 1.6 mm
  • 2.0 mm
  • 5/64 in (2.0 mm)

Package

Select Package

  • 22.7 KG COIL

DETAILS

LINCORE® 60-O ideal for carbon, low alloy, manganese, stainless steels and cast iron to be used at temperatures up to 704°C (1300°F) deposits feature higher alloy levels than to resist both abrasion and moderate impact limited to two layers with a Rockwell Hardness range of 55-60 (RHC) during sever abrasion.

Features

  • Deposits feature higher alloy levels than to resist both abrasion and moderate impact
  • Can be used at temperatures up to 704°C (1300°F)
  • To be used on carbon, low alloy, manganese, stainless steels and cast iron
  • Deposit is limited to two layers

Service Information

You May Also Need

33 lb Steel Spool Outershield MC-409 Flux-Cored Wire

Lincore® 60-O

ED031132

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

MECHANICAL PROPERTIES

Classification Number of layer Hardness Rockwell C Mass Loss (G65)
Typical Result 1 Layer 50-55 0.67
Typical Result 2 Layers 55-58 0.20

DEPOSIT COMPOSITION

Classification Number of layer %Al %C %Cr %Mn %Si
Typical Result 2 Layers 0.3-0.4 4.0-4.6 18.5-22.9 1.0-1.8 0.5-0.9

TYPICAL OPERATING PROCEDURES

Diameter Polarity ESO
mm (in.) 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Deposition Rate
kg/hr (lb/hr)
.045" (1.1 mm) DC+ 19 (1) 5.1 (200) 21 125 1.9 (4.1)
.045" (1.1 mm) DC+ 19 (1) 10.2 (400) 25 185 3.7 (8.2)
.045" (1.1 mm) DC+ 19 (1) 12.7 (500) 27 210 4.7 (10.3)
1/16" (1.6 mm) DC+ 22 (1) 5.1 (200) 28 240 3.4 (7.6)
1/16" (1.6 mm) DC+ 22 (1) 7.6 (300) 31 300 5.1 (11.2)
1/16" (1.6 mm) DC+ 22 (1) 11.4 (450) 33 350 7.5 (16.6)
5/64" (2.0 mm) DC+ 32 (1) 3.2 (125) 26 250 3.4 (7.4)
5/64" (2.0 mm) DC+ 32 (1) 5.1 (200) 30 350 5.4 (12.0)
5/64" (2.0 mm) DC+ 32 (1) 6.4 (250) 32 400 6.8 (15.1)
7/64" (2.8 mm) DC+ 29 (1) 1.9 (75) 27 250 3.4 (7.4)
7/64" (2.8 mm) DC+ 29 (1) 3.2 (125) 30 340 5.4 (11.9)
7/64" (2.8 mm) DC+ 29 (1) 4.4 (175) 32 420 7.5 (16.5)

NOTES

Note
Deposit thickness limit is two layers unless high travel speed is used to obtain very closely spaced check cracks. Many layers can be used with high travel speed and small bead sizes to ensure close-spaced check cracks.
Lincore® 60-O deposit cross cracks (commonly called cross-checking) on cooling. This is desirable, since cross-cracking of the deposit relieves cooling stresses and prevents spalling.