DETTAGLI
Progettato per la saldatura verticale discendente di tubi cross-country e interni all’impianto.
Caratteristiche
- Q2 Lot® controllato e testato – certificato del lotto disponibile online.
- Eccellenti proprietà di resilienza senza l’aggiunta volontaria di boro
- Bagno di fusione visibile e pulito
- Controllo superiore del bagno di fusione
Informazioni sui servizi
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Pagina di ricerca SDS
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.5 | E8010-G, E8010-P1 |
| CWB | CSA W48 | E5510-P1 |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
Charpy V-Notch
J (ft-lbs) @ -45°C (-50°F) |
Hardness Rockwell B |
|---|---|---|---|---|---|---|
| E8010-P1 Requirement | 460 (67) min. | 550 (80) min. | 19 min. | 27 (20) min. | ||
| Typical Result, As-welded | 460-540 (67-78) | 550-650 (80-94) | 19-29 | 51-114 (38-84) | 34-93 (25-69) | 86-98 |
DEPOSIT COMPOSITION
| Classification | %B | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %V |
|---|---|---|---|---|---|---|---|---|---|---|
| E8010-P1 Requirement | 0.20 max. | 0.30 max. | 1.20 max. | 0.50 max. | 1.00 max. | 0.03 max. | 0.03 max. | 0.60 max. | 0.10 max. | |
| Typical Result | 0.0002 max. | 0.12-0.20 | 0.01-0.05 | 0.59-0.97 | 0.09-0.20 | 0.60-1.00 | 0.01 max. | 0.01 | 0.09-0.23 | 0.01 |
TYPICAL OPERATING PROCEDURES
| Classification⁽²⁾ | Polarity⁽¹⁾ |
Current
Amps |
|---|---|---|
| 4.0 mm (5/32 in) | DC+ | 100-165 |
| 3/16 in | DC+ | 125-205 |
| 5.0 mm | DC+ | 130-210 |
NOTES
| Note |
|---|
| ⁽¹⁾ Preferred polarity is listed first. |
| ⁽²⁾ Size 3/16 in. is manufactured to US standard units |