Menu zamknij
33 lb Steel Spool Outershield MC-409 Flux-Cored Wire

Średnica / Opakowanie

Średnice
 Szpula 11,3 KG
1.6 mm ED031129
2.0 mm ED031130

Lincore® M

Spawanie z samoosłonowym rdzeniem topnikowym (FCAW-S) | ED031129

KLASYFIKACJE:
EN ISO : T Fe9

LINCORE® M Flux-Cored Self-Shielded Wire produces an austenitic manganese deposit on hammers, dredge parts, crushers, breaker bars and buckets applications. (Build Up and Joining)

Średnica

Wybierz średnicę

  • 1.6 mm
  • 2.0 mm

Zestaw

Wybierz pakiet

  • Szpula 11,3 KG

Wprowadzenie

LINCORE® M ideal for build-up and repair of Hadfield-type austenitic manganese materials as well as carbon and low alloy steels, deposits resistance on severe impact as well as moderate abrasion and offers unlimited layers with proper preheat and interpass temperatures and procedures.

Zalety

  • Zalecany do napawania utwardzającego i regeneracyjnego austenitycznej stali manganowej, niestopowej i niskostopowej.
  • Dowolna liczba warstw przy zachowaniu odpowiednich procedur podgrzewania wstępnego i temperatur międzyściegowych
  • Bardzo wysoka odporność na obciążenia udarowe i umiarkowana odporność na ścieranie
  • Unlimited layers with proper preheat and interpass temperatures and procedures

Informacje o usługach

Dokumentacja

Możesz także potrzebować

33 lb Steel Spool Outershield MC-409 Flux-Cored Wire

Lincore® M

ED031130

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Strona wyszukiwania kart SDS

MECHANICAL PROPERTIES

Classification Hardness Rockwell C
Typical Result 18-28
Typical Result, Work-hardened 30-48

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Ni %Si
Typical Result 0.6 4.9 13.0 0.5 0.4

TYPICAL OPERATING PROCEDURES

Diameter Polarity ESO
mm (in.) 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Deposition Rate
kg/hr (lb/hr)
0.045 in (1.1 mm) DC+ 25 (1) 5.1 (200) 22 80 1.5 (3.3)
0.045 in (1.1 mm) DC+ 25 (1) 8.9 (350) 24 145 2.7 (6.0)
0.045 in (1.1 mm) DC+ 25 (1) 12.7 (500) 26 185 4.4 (9.6)
1/16 in (1.6 mm) DC+ 30 (1 1/8) 3.8 (150) 23 130 2.2 (4.9)
1/16 in (1.6 mm) DC+ 30 (1 1/8) 6.4 (250) 25 200 3.9 (8.6)
1/16 in (1.6 mm) DC+ 30 (1 1/8) 8.9 (350) 27 250 5.6 (12.4)
5/64 in (2.0 mm) DC+ 32 (1 1/4) 3.2 (125) 24 240 2.9 (6.4)
5/64 in (2.0 mm) DC+ 32 (1 1/4) 4.4 (175) 27 300 4.2 (9.3)
5/64 in (2.0 mm) DC+ 32 (1 1/4) 6.4 (250) 29 360 6.2 (13.6)
7/64 in (2.8 mm) DC+ 45 (1 3/4) 1.9 (75) 25 240 3.5 (7.8)
7/64 in (2.8 mm) DC+ 45 (1 3/4) 3.2 (125) 27 360 6.2 (13.6)
7/64 in (2.8 mm) DC+ 45 (1 3/4) 3.8 (150) 28 395 7.5 (16.6)
7/64 in (2.8 mm) DC+ 64 (2 1/2) 1.9 (75) 25 240 3.6 (8.0)
7/64 in (2.8 mm) DC+ 64 (2 1/2) 4.4 (175) 30 400 8.8 (19.5)
7/64 in (2.8 mm) DC+ 64 (2 1/2) 5.7 (225) 32 455 11.6 (25.6)

NOTES

Note
As with all austenitic manganese welding products, interpass temperatures should be limited to 260°C (500°F) maximum.
A stringer bead, or at most, a slight weave is recommended to limit heat build-up. Excessive heat build-up causes manganese carbide precipitation that damages the toughness of austenitic manganese.