Wprowadzenie
Elektroda celulozowa, szczególnie zalecana do spawania rur.
Zalety
- Niewielkie odpryski żużla, minimalnie ingerujące w łuk.
- Głebokie wtopienie
- Czyste, wyraźnie widoczne jeziorko
- Doskonała kontrola jeziorka spawalniczego.
Informacje o usługach
Możesz także potrzebować
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Strona wyszukiwania kart SDS
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.5 | E7010-P1 |
| ABS | AWS A5.5 | E7010-P1 |
| CWB | CSA W48 | E4910-P1 |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
|---|---|---|---|---|
| E7010-P1 Requirement | 410 (60) min. | 480 (70) min. | 22 min. | 27 (20) min. |
| Typical Result, As-welded | 430-490 (62-70) | 530-580 (76-85) | 22-29 | 27-96 (20-71) |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %V |
|---|---|---|---|---|---|---|---|---|---|
| E7010-P1 Requirement | 0.20 max. | 0.30 max. | 1.20 max. | 0.50 max. | 1.00 max. | 0.03 max. | 0.03 max. | 0.60 max. | 0.10 max. |
| Typical Result | 0.08-0.16 | 0.01-0.04 | 0.43-0.53 | 0.26-0.33 | 0.01-0.04 | 0.01 | 0.01 max. | 0.06-0.18 | 0.005 max. |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
Current
Amps |
|---|---|---|
| 1/8 in (3.2 mm) | DC+ | 75-130 |
| 5/32 in (4.0 mm) | DC+ | 90-185 |
| 3/16 in (4.8 mm) | DC+ | 140-225 |