Meniu Închidere
Excalibur 7018 MR 14 stick electrode"

Diametre / Ambalaj

Diametre
 (3) 10 lb Easy Open Can
1/8 x 14 in (3.2 x 350 mm) ED032589
3/32 x 14 in (2.4 x 350 mm) ED032588
5/32 x 14 in (4.0 x 350 mm) ED032590

Excalibur® 7018 MR® Stick (SMAW) Electrode

Sudare sub strat de flux | ED032589

CLASIFICARI:
AWS A5.1 : E7018 H4R

Otel carbon, hidrogen scăzut • AWS E7018 H4R

Diametru

Selectare diametru

  • 1/8 x 14 in (3.2 x 350 mm)
  • 3/32 x 14 in (2.4 x 350 mm)
  • 5/32 x 14 in (4.0 x 350 mm)

Ambalaj

Selectare ambalaj

  • (3) 10 lb Easy Open Can

DETALII

Integritate îmbunătățită a învelișului Abilitate extremă la îndoire Absorbție umiditate cu 60% mai scăzută față de competiție

Caracteristici

  • Performanță arc premium
  • Abilitate extremă la îndoire
  • Rezistență excelentă la umiditate
  • Start curat al arcului
  • Baie de fuziune clară și arc liniștit

Informații despre service

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Pagina de căutare FDS

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.1 E7018 H4R
ISO ISO 2560-B E4918 A H5
ABS ABS - Part 2 3YH5
BV BV - Chapter 5 3YHHH
CWB CSA W48 E4918
DNV-GL DNV - 2.9 3YH5
LR LR - Chapter 11 3YM H5

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Hardness Rockwell B
E7018 H4R Requirement 400 (58) min. 480 (70) min. 22 min. 27 (20) min.
Typical Result, As-welded 420-510 (60-74) 510-600 (74-87) 24-36 27-413 (20-304) 82-91

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V %Mn+Ni+Cr+Mo+V Diffusible Hydrogen
mL/100g Weld Metal 		1800F H2O - As received 1800F H2O - After 9 hrs at 80F/80%RH
E7018 H4R Requirement 0.15 max. 0.20 max. 1.60 max. 0.30 max. 0.30 max. 0.035 max. 0.035 max. 0.75 max. 0.08 max. 1.75 max. 4 max. 0.3 max. 0.4 max.
Typical Result 0.04-0.07 0.02-0.06 1.08-1.51 0.04 max. 0.01-0.05 0.009-0.016 0.004-0.011 0.41-0.66 0.01 max. 1.15-1.59 1-4 0.1 max. 0.2-0.4

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
3/32 in (2.4 mm) DC+ 70-110
3/32 in (2.4 mm) AC 80-120
1/8 in (3.2 mm) DC+ 90-160
1/8 in (3.2 mm) AC 100-160
5/32 in (4.0 mm) DC+ 130-210
5/32 in (4.0 mm) AC 140-210
3/16 in (4.8 mm) DC+ 180-300
3/16 in (4.8 mm) AC 200-300
7/32 in (5.6 mm) DC+ 250-330
7/32 in (5.6 mm) AC 270-370
1/4 in (6.4 mm) DC+ 300-400
1/4 in (6.4 mm) AC 325-420

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.
Extreme bendability applies to 3/32, 1/8, and 5/32 in. diameters.