Menu Close
Innershield Flux Cored wire, 25 or 30 lb steel spool

Diameters / Packaging

Diameters
 11.3 KG SPOOL
0.068 in (1.7 mm) ED030640

Innershield® NR®-203MP Flux-Cored (FCAW-S) Wire

Flux-Cored Self-Shielded (FCAW-S) | ED030640

CLASSIFICATIONS:
E71T-8-JH8
E71T8-A4-CS3-H8

Innershield® NR®-203MP from Lincoln Electric is designed to handle poor fit-up on heavy wall tubes and gaps up to 9.5 mm (3/8 in.) with 6.4 mm (1/4 in.) offset.

Diameter

Select Diameter

  • 0.068 in (1.7 mm)

Package

Select Package

  • 11.3 KG SPOOL

DETAILS

Designed to handle poor fit-up on heavy wall tubes and gaps up to 9.5 mm (3/8 in) with 6.4 mm (1/4 in) offset. Recommended for all position welding on unlimited plate thicknesses.

Features

  • Designed to handle poor fit-up on heavy wall tubes and gaps up to 9.5 mm (3/8 in) with 6.4 mm (1/4 in) offset
  • Fast freezing slag with excellent wash-in
  • Root bead capability without back-up bars

Service Information

You May Also Need

K126 Classic 350A FCAW-SS

K126® Classic® Innershield® 350A FCAW-SS Welding Gun 15 ft 062-332

K126-2
Gun Receiver Bushing

Gun Receiver Bushing for Lincoln Electric® Guns

K1500-1
Drive Roll and Guide Tube Kit

Drive roll kit (2R) 1.8 mm

KP1697-068
Image not found

Nozzle Insulated (Nose Cone)

KP1987-1
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.20 E71T-8-JH8
AWS AWS A5.36 E71T8-A4-CS3-H8
ABS ABS - Part 2 3YSA H15
BV BV - Chapter 5 SA3YMH
CWB CSA W48 E491T8-A4-CS3-H8 (E491T-8-JH8)
DNV-GL DNV - 2.9 III YMS H10
LR LR - Chapter 11 3YS H15

MECHANICAL PROPERTIES

Classification Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F)
E71T-8-JH8 Requirement DC- 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
E71T8-A4-CS3-H8 Requirement DC- 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
Typical Result, As-welded DC- 400 (58) 500-570 (72-82) 26 96-354 (71-261) 35-398 (26-294)

DEPOSIT COMPOSITION

Classification Polarity %Al %C %Mn %P %S %Si Diffusible Hydrogen
mL/100g Weld Metal
E71T-8-JH8 Requirement DC- 0.30 max. 1.75 max. 0.03 max. 0.03 max. 0.60 max. 8.0 max.
E71T8-A4-CS3-H8 Requirement DC- 0.30 max. 1.75 max. 0.030 max. 0.030 max. 0.60 max. 8 max.
Typical Result DC- 0.7-1.1 0.05-0.07 1.25-1.56 0.012 0.004 0.20-0.28 5.3

TYPICAL OPERATING PROCEDURES

Diameter Polarity CTWD
mm (in.) 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr) 		Deposition Rate
kg/hr (lb/hr) 		Efficiency
%
0.068 in (1.7 mm) DC- 25 (1) 1.8 (70) 16-17 145 1.5 (3.3) 1.0 (2.3) 69
0.068 in (1.7 mm) DC- 25 (1) 2.3 (90) 18-19 180 1.9 (4.2) 1.5 (3.2) 76
0.068 in (1.7 mm) DC- 25 (1) 3.0 (120) 20-21 225 2.5 (5.6) 2.0 (4.3) 76
0.068 in (1.7 mm) DC- 25 (1) 3.5 (140) 21-22 255 2.9 (6.4) 2.2 (4.8) 75
0.068 in (1.7 mm) DC- 25 (1) 3.8 (150) 23-24 265 3.1 (6.8) 2.3 (5.1) 75
5/64 in (2.0 mm) DC- 25 (1) 1.3 (50) 16-17 130 1.4 (3.1) 0.9 (1.9) 61
5/64 in (2.0 mm) DC- 25 (1) 1.8 (70) 18-19 180 2.0 (4.3) 1.3 (2.9) 67
5/64 in (2.0 mm) DC- 25 (1) 2.3 (90) 19-20 220 2.5 (5.6) 1.9 (4.2) 75
5/64 in (2.0 mm) DC- 25 (1) 2.8 (110) 20-21 260 3.1 (6.8) 2.4 (5.3) 77
5/64 in (2.0 mm) DC- 25 (1) 3.0 (120) 21-22 280 3.4 (7.4) 2.7 (5.9) 79
5/64 in (2.0 mm) DC- 25 (1) 3.5 (140) 22-23 310 3.9 (8.7) 3.1 (6.8) 79