DETAILS
Iron-based chromium carbide alloys designed for applications subject to abrasion accompanied by impact from rock, ore, clay, sand or cement, including digging or crusher surfaces or parts that must maintain sharp cutting edges. This product can be applied in multiple layers and may cross check crack. Metal-to- Earth hardfacing products can be used on carbon, low alloy, manganese, stainless and cast iron parts. Used in applications with abrasion accompanied by impact.
Eigenschaften
- Use on carbon, stainless and manganese steels
- Deposit is limited to two layers
- Provides good resistance to abrasion, impact and some metal-to-metal wear
- Can be forged readily without affecting its mechanical properties
Service Informationen
Ergänzende Produkte
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS-Suchseite
MECHANICAL PROPERTIES
| Classification | Number of layer | Hardness Rockwell C |
|---|---|---|
| Typical Result | 1 Layer | 24-53 |
| Typical Result | 2 Layers | 28-53 |
DEPOSIT COMPOSITION
| Classification | Base Metal | Number of layer | %C | %Cr | %Mn | %Mo | %Si |
|---|---|---|---|---|---|---|---|
| Typical Result | Mild Steel | 2 Layers | 2.1 | 6.5 | 1.1 | 0.4 | 0.8 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
Current
Amps |
|---|---|---|
| 1/8" (3.2 mm) | AC | 50-165 |
| 5/32" (4.0 mm) | AC | 80-220 |
| 3/16" (4.8 mm) | AC | 120-275 |
| 1/8" (3.2 mm) | DC+ | 40-150 |
| 5/32" (4.0 mm) | DC+ | 75-200 |
| 3/16" (4.8 mm) | DC+ | 110-250 |