DETAILS
These products are austenitic manganese alloys, producing tough, high-strength deposits that will workharden under impact. Primarily used for joining, repairing or building up manganese steel parts that need to be joined together or joining manganese to carbon steel, including railroad frogs, impact hammers, rotors and rock crusher rolls.
Eigenschaften
- Provides good resistance to abrasion, impact and some metal-to-metal wear
- Good hot forging properties
- Use on carbon, stainless and manganese steels
- Deposits limited to two layers
- Can be forged readily without affecting its mechanical properties
Service Informationen
Ergänzende Produkte
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS-Suchseite
MECHANICAL PROPERTIES
| Classification | Number of layer | Hardness Rockwell C |
|---|---|---|
| Typical Result | 1 Layer | 24-53 |
| Typical Result | 2 Layers | 28-53 |
DEPOSIT COMPOSITION
| Classification | Base Metal | Number of layer | %C | %Cr | %Mn | %Mo | %Si |
|---|---|---|---|---|---|---|---|
| Typical Result | Mild Steel | 2 Layers | 2.1 | 6.5 | 1.1 | 0.4 | 0.8 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
Current
Amps |
|---|---|---|
| 1/8" (3.2 mm) | AC | 50-165 |
| 5/32" (4.0 mm) | AC | 80-220 |
| 3/16" (4.8 mm) | AC | 120-275 |
| 1/8" (3.2 mm) | DC+ | 40-150 |
| 5/32" (4.0 mm) | DC+ | 75-200 |
| 3/16" (4.8 mm) | DC+ | 110-250 |