Menu Close
00022856.jpg

Diameters / Packaging

Diameters
 10CPL (40CT)
 50 lb Carton
1/8 x 14 in (3.2 x 350 mm) ED038089
3/16 x 14 in (4.8 x 350 mm) ED038091
3/32 x 12 in (2.4 x 300 mm) ED038088 EDM13182343
5/32 x 14 in (4.0 x 350 mm) ED038090

Murex® 6011C

Stick (SMAW) | ED038088

AWS:
E6011

Mild Steel, Cellulosic, AWS E6011

Diamètre

Sélectionnez le diamètre

  • 1/8 x 14 in (3.2 x 350 mm)
  • 3/16 x 14 in (4.8 x 350 mm)
  • 3/32 x 12 in (2.4 x 300 mm)
  • 5/32 x 14 in (4.0 x 350 mm)

Paquet

Sélectionnez un forfait

  • 10CPL (40CT)
  • 50 lb Carton
Acheter maintenant

Détails

Deep penetration and fast freezing

  • Fast deposition and flatter contour fillets deliver faster travel speeds
  • Good slag removal
  • Manufactured under a quality system certified to ISO 9001 requirements

    • Traits

    • Good Slag Removal
    • Deep penetration and fast freezing
    • Fast travel speed and flatter contour fillet deliver
    • AC polarity

    Disclaimers

    Warning -

    Cancer and Reproductive Harm -

    www.P65Warnings.ca.gov

    Des informations de service

    BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

    See test result disclaimer

    CONFORMANCE

    CONFORMANCES SPECIFICATION CLASSIFICATION
    AWS AWS A5.1 E6011
    ABS AWS A5.1 E6011

    MECHANICAL PROPERTIES

    Classification Yield Strength @ 0.2% Offset
    MPa (ksi)     		Tensile Strength
    MPa (ksi)     		Elongation
    %     		Charpy V-Notch
    J (ft-lbs) @ -30°C (-20°F)     		Hardness Rockwell B
    E6011 Requirement 330 (48) min. 410 (60) min. 22 min. 27 (20) min.
    Typical Result, As-welded 380-460 (56-66) 470-550 (68-80) 22-38 37-111 (27-82) 78-87

    DEPOSIT COMPOSITION

    Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V %Mn+Ni+Cr+Mo+V
    E6011 Requirement 0.20 max. 0.20 max. 1.20 max. 0.30 max. 0.30 max. 1.00 max. 0.08 max.
    Typical Result 0.10-0.13 0.02-0.07 0.47-0.77 0.01 max. 0.01-0.04 0.007-0.012 0.005-0.010 0.15-0.39 0.01 max. 0.58-0.81

    TYPICAL OPERATING PROCEDURES

    Diameter Polarity Current
    Amps
    3/32 in (2.4 mm) AC 50-90
    1/8 in (3.2 mm) AC 80-130
    5/32 in (4.0 mm) AC 120-180
    3/16 in (4.8 mm) AC 140-220