Diameters / Packaging
|
Diameters |
10CPL (40CT) |
50 lb Carton |
|---|---|---|
| 1/8 x 14 in (3.2 x 350 mm) | ED038089 | |
| 3/16 x 14 in (4.8 x 350 mm) | ED038091 | |
| 3/32 x 12 in (2.4 x 300 mm) | ED038088 | EDM13182343 |
| 5/32 x 14 in (4.0 x 350 mm) | ED038090 |
Détails
- Deep penetration and fast freezing
- Fast deposition and flatter contour fillets deliver faster travel speeds
- Good slag removal
- Manufactured under a quality system certified to ISO 9001 requirements
Traits
- Good Slag Removal
- Deep penetration and fast freezing
- Fast travel speed and flatter contour fillet deliver
- AC polarity
Disclaimers
Des informations de service
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.1 | E6011 |
| ABS | AWS A5.1 | E6011 |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
Hardness Rockwell B |
|---|---|---|---|---|---|
| E6011 Requirement | 330 (48) min. | 410 (60) min. | 22 min. | 27 (20) min. | |
| Typical Result, As-welded | 380-460 (56-66) | 470-550 (68-80) | 22-38 | 37-111 (27-82) | 78-87 |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %V | %Mn+Ni+Cr+Mo+V |
|---|---|---|---|---|---|---|---|---|---|---|
| E6011 Requirement | 0.20 max. | 0.20 max. | 1.20 max. | 0.30 max. | 0.30 max. | 1.00 max. | 0.08 max. | |||
| Typical Result | 0.10-0.13 | 0.02-0.07 | 0.47-0.77 | 0.01 max. | 0.01-0.04 | 0.007-0.012 | 0.005-0.010 | 0.15-0.39 | 0.01 max. | 0.58-0.81 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
Current
Amps |
|---|---|---|
| 3/32 in (2.4 mm) | AC | 50-90 |
| 1/8 in (3.2 mm) | AC | 80-130 |
| 5/32 in (4.0 mm) | AC | 120-180 |
| 3/16 in (4.8 mm) | AC | 140-220 |