Menu Close
25lb plastic spool Innershield NR-305

Diameters / Packaging

Diameters
 33 lb Spool
0.045 in (1.1 mm) ED032217
1/16 in (1.6 mm) ED032216

UltraCore® 81Ni2A75-H

Flux-Cored Gas-Shielded (FCAW-G) | ED032216

AWS:
E81T1-Ni2M-JH4
E81T1-M21A6-Ni2-H4

L'UltraCore® 81Ni2A75-H de Lincoln Electric présente une résistance supérieure aux fissures en raison de faibles niveaux d'hydrogène diffusible (4 ml/100 grammes de dépôt de soudure max).

Diamètre

Sélectionnez le diamètre

  • 0.045 in (1.1 mm)
  • 1/16 in (1.6 mm)

Paquet

Sélectionnez un forfait

  • 33 lb Spool
Acheter maintenant

Détails

Pour les applications à haute résistance et à faible alliage où la productivité et l’uniformité sont essentielles dans les applications 75 % d'argon/25 % de CO2. Le gaz de protection mélangé stabilise les caractéristiques de l'arc, réduit les niveaux d’éclaboussures et s’élimine du cordon de soudure pour un aspect plat.

Traits

  • Capable de produire des dépôts de soudure avec une ténacité à l'impact supérieure à 88 J à 123 J (88,13 à 123,38 N · m/65 à 91 pi·lb) à - 40 °C (- 40 °F)
  • Conçu pour le soudage avec un gaz de protection 75 - 85 % d’argon/reste de CO2
  • Performances de l'arc et aspect du cordon de qualité supérieure
  • Conforme aux exigences de la norme AWS D1.8 sur la dérogation de lot sismique
  • Conditionnement en sachet en aluminium ProTech®
  • Notes: AWS D1.8 structural steel seismic supplement test data can be found at the Lincoln Electric Certificate Center.

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

Vous pourriez également avoir besoin

Magnum Pro 250 MIG Welding gun

Magnum® PRO 350 Welding Guns

K2652-2
50 lb Can of Lincoln Electric Stick Electrodes

Excalibur® 8018-C1 MR® Stick (SMAW) Electrode

ED030876
50 lb Can of Lincoln Electric Stick Electrodes

Excalibur® 8018-C1 MR® Stick (SMAW) Electrode

ED030877
25lb plastic spool Innershield NR-305

UltraCore® 81Ni1C-H Flux-cored (FCAW-G) Wire

ED032205
25lb plastic spool Innershield NR-305

UltraCore® 81Ni1A75-H

ED032207
Drive Roll and Guide Tube Kit

Drive roll kit (2R) 1.6 mm

KP1697-1/16C
Magnum Pro 250L Gun

Magnum® PRO Nozzle - 350A, Thread-on, Recess, 1/2 in (12.7 mm) ID

KP2742-1-50R
Magnum Pro Tapered Contact tip

Copper Plus® Contact Tip - 350A, Standard, 1/16 in (1.6 mm) - 10/pack

KP2744-116

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.29 E81T1-Ni2M-JH4
AWS AWS A5.36 E81T1-M21A6-Ni2-H4
ABS ABS - Part 2 3YSA H5
CWB CSA W48 E551T1-M21A5-Ni2-H4 (E551T1-Ni2M-JH4)
DNV-GL DNV - 2.9 III Y40MS H5
LR LR - Chapter 11 3YS H5

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) 		Charpy V-Notch
J (ft-lbs) @ -50°C (-60°F) 		Charpy V-Notch
J (ft-lbs) @ -60°C (-75°F)
E81T1-Ni2M-JH4 Requirement 75-80% Ar, balance CO2 DC+ 470 (68) min. 550-690 (80-100) 19 min. 27 (20) min.
E81T1-M21A6-Ni2-H4 Requirement M21-ArC DC+ 470 (68) min. 550-690 (80-100) 19 min. 27 (20) min.
Typical Result, As-welded 75% Ar, 25% CO2 DC+ 540 (78) 590-680 (85-98) 22 88-125 (65-92) 31-117 (23-87) 33-42 (24-31)

DEPOSIT COMPOSITION

Classification Shielding Gas Polarity %B %C %Mn %Ni %P %S %Si Diffusible Hydrogen
mL/100g Weld Metal
E81T1-Ni2M-JH4 Requirement 75-80% Ar, balance CO2 DC+ 0.12 max. 1.50 max. 1.75 - 2.75 0.030 max. 0.030 max. 0.80 max. 4.0 max.
E81T1-M21A6-Ni2-H4 Requirement M21-ArC DC+ 0.12 max. 1.50 max. 1.75 - 2.75 0.030 max. 0.030 max. 0.80 max. 4 max.
Typical Result 75% Ar, 25% CO2 DC+ 0.004-0.0061 0.04-0.05 0.91-1.06 2.00-2.34 0.014 max. 0.010 max. 0.25-0.33 1.3-4

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Polarity CTWD
mm (in.)⁽¹⁾ 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr) 		Deposition Rate
kg/hr (lb/hr) 		Efficiency
%
0.045 in (1.1 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 4.4 (175) 21-26 140 1.8 (4.0) 1.6 (3.5) 86-88
0.045 in (1.1 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 5.1 (200) 22-27 150 2.1 (4.6) 1.8 (4.0) 86-88
0.045 in (1.1 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 6.4 (250) 22-27 165 2.6 (5.7) 2.3 (5.0) 86-88
0.045 in (1.1 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 7.6 (300) 23-28 190 3.1 (6.8) 2.7 (6.0) 86-88
0.045 in (1.1 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 8.9 (350) 24-29 205 3.6 (8.0) 3.2 (7.0) 86-88
0.045 in (1.1 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 9.5 (375) 24-29 225 3.9 (8.6) 3.4 (7.5) 86-88
0.045 in (1.1 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 10.8 (425) 25-30 245 4.4 (9.7) 3.8 (8.5) 86-88
0.045 in (1.1 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 12.1 (475) 26-31 265 4.9 (10.8) 4.3 (9.5) 86-88
0.045 in (1.1 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 12.7 (500) 27-32 275 5.2 (11.4) 4.5 (10.0) 86-88
0.052 in (1.3 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 3.8 (150) 21-26 150 2.0 (4.5) 1.8 (3.9) 86-88
0.052 in (1.3 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 4.7 (185) 22-27 165 2.5 (5.5) 2.2 (4.8) 86-88
0.052 in (1.3 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 5.7 (225) 22-27 190 3.1 (6.7) 2.7 (5.9) 86-88
0.052 in (1.3 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 6.4 (250) 23-28 215 3.4 (7.5) 2.9 (6.5) 86-88
0.052 in (1.3 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 7.0 (275) 23-28 235 3.7 (8.2) 3.2 (7.2) 86-88
0.052 in (1.3 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 7.6 (300) 24-29 255 4.1 (9.0) 3.5 (7.8) 86-88
0.052 in (1.3 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 8.5 (335) 24-30 275 4.5 (10.0) 4.0 (8.7) 86-88
0.052 in (1.3 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 9.5 (375) 25-31 295 5.1 (11.2) 4.4 (9.8) 86-88
0.052 in (1.3 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 10.2 (400) 25-32 310 5.4 (12.0) 4.7 (10.4) 86-88
1/16 in (1.6 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 3.8 (150) 21-27 200 2.9 (6.3) 2.5 (5.5) 86-88
1/16 in (1.6 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 4.4 (175) 21-28 210 3.3 (7.4) 2.9 (6.4) 86-88
1/16 in (1.6 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 5.1 (200) 22-29 235 3.8 (8.4) 3.3 (7.3) 86-88
1/16 in (1.6 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 5.7 (225) 23-30 265 4.3 (9.5) 3.7 (8.2) 86-88
1/16 in (1.6 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 6.4 (250) 24-31 285 4.8 (10.5) 4.2 (9.2) 86-88
1/16 in (1.6 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 7.0 (275) 24-32 315 5.3 (11.6) 4.6 (10.1) 86-88
1/16 in (1.6 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 8.3 (325) 24-32 335 6.2 (13.7) 5.4 (11.9) 86-88
1/16 in (1.6 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 8.9 (350) 25-33 365 6.7 (14.7) 5.8 (12.8) 86-88

NOTES

Note
⁽¹⁾ To estimate ESO, subtract 1/4 in. (6.0 mm) from CTWD.